Edge banding machine (spindle moulders)

SCM OLIMPIC K360

MACHINING CAPACITIES:
- Panel height (thickness) to be processed: 8 to 60 mm
Bedpfx Ajx Dcn Njg Ielr
10 to 45 mm when using the corner rounding unit
- Panel length: >=220 mm
- Panel width: 90 to 1100 mm
- Feed (advance speed): 11 m/min
- Workpiece overhang: mm
- Minimum-maximum dimensions for panel radiusing: Ø x mm
- Panel overhang relative to the conveyor belt:
- Max spindle cutting depth: mm²
- Workpiece gap: mm

Roll edging:
- Thickness: 0.4 to 3 mm
- Width (height): panel thickness +4 mm
- Minimum length: 200 mm

Strip edging:
- Maximum thickness: 6 mm
maximum 3 mm with corner rounding unit
- Width (height): panel thickness +4 mm
- Minimum length: 220 mm
280 mm with corner rounding

MACHINE CONFIGURATION:
- Unwinding table, usable Ø795 mm
- Working table: L 4.15m / H 91.5 cm
With 500 mm front extension
- Chain feed conveyor
- Anti-adhesive spray system
- Edge trimming units (2 spindles) 12,000 rpm
- Gluing station with interchangeable glue pot, 180-200°C
Pneumatic pre-cut guillotine
Pressure section with 3 rollers, 1 of which is motorized
- End-trimming aggregate with 2 blades, 12,000 rpm
- Top/bottom flush trimming unit with copying pads
- Corner rounding unit
- Radius scrapers
- Straight scrapers
Digital counters for settings (type SIKO)

OTHER FEATURES:
- Main power supply: 400V, 3-phase, 50Hz, IN 21A
- Feed motor: 0.75 kW
- Spindle motors: 2 x 1.5 kW
- Saw motors: 2 x 0.19 kW
- Trimming (milling) motors: 2 x 0.55 kW, rpm
- Pneumatic supply: 8–10 bar, dry air
Required working pressure: 6 bar
- Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int.
Required volume flow: 1600 m³/h
- CE marking, lockable safety switch, emergency stop push buttons

Operating dimensions: 4.45 x 1.70 x h.1.80 m
Transport dimensions (L x W x H):
4.25 x 0.90 x h.1.50 m
Weight: 1430 kg

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.