Edge banding machine Lange Maschinenbau B 70 K

Lange Maschinenbau B 70 K

Used machine

Year of manufacture: 2013

Very well-maintained machine

Equipment:

- Machine table with 13 running rollers for improved workpiece guidance
- Edge feed, synchronized with the belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with blade (for cuttable edges)
- Three pressure rollers
- Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment
- Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime
- Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges
- Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper milling cutter with the belt feed
- Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm
- Rotatable film disc Ø 800 mm

Technical details:

- Minimum workpiece width approx. 80 mm
- Workpiece thickness 10 – 50 mm
- Minimum workpiece length approx. 220 mm
- Edge thickness 0.4 – 2.0 mm
- Roller separation max. 1.0 x 55 mm, 2 x 45 mm
- Heating capacity glue pot 2.7 kW
- Electrical connection 400 V, 50 Hz, 3Ph + N
- Total connected load 3.8 kW
- Heat-up time approx. 10 minutes
Nsdeytkiuspfx An Tola
- Pneumatic connection 6 bar
- Working height approx. 880 mm
- Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800
- Net weight approx. 260 kg

Availability: short notice
Location: Flörsheim

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.