Edge banding machine up to 100 mm gluing heightLange Maschinenbau
B 70 K-100
Edge banding machine up to 100 mm gluing height
Lange Maschinenbau
B 70 K-100
سال ساخت
۲۰۱۸
وضعیت
کارکرده
موقعیت
آلمان 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- D - Hessen

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19137466
- شماره مرجع:
- ISSH20230727-4468
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۶.۰۸.۱۴۰۴
توضیحات
Used machine
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
Gjdpswka S Ijfx Agmsbg
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
Gjdpswka S Ijfx Agmsbg
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2008
ارسال درخواست
تلفن & فکس
+49 6146 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Bergatreute
۴٬۰۴۶ km
VotecsEZ 10- 2
آگهی کوچک
Złotogłowice
۳٬۵۸۲ km
EXPOGLASS ®M80-30
آگهی کوچک
Geiselwind
۴٬۰۳۳ km
SchulteGG 10
آگهی کوچک
Roreto
۴٬۱۵۷ km
ERREGICompact 250/6R + Tunnel 700
آگهی کوچک
Grevesmühlen
۴٬۱۰۵ km
RivoGA250
آگهی کوچک
Navan
۵٬۲۵۸ km
WEIMASpider WLK 1500
آگهی کوچک
Zuzenhausen
۴٬۱۴۰ km
WEIMAWLK 1500
آگهی کوچک
Tauberbischofsheim
۴٬۰۸۷ km
HebrockEURO 3001
آگهی کوچک
Siedlce
۳٬۳۴۶ km
CORMAKMJ45-KB4 (3200)
آگهی کوچک
Mediniai Strėvininkai
۳٬۳۸۴ km
OTT (GEBEMA)
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است











































































