Offset printing press

FAG (nowadays under Bobst) speedproof 4C

Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm
Paper thickness: 0.05 mm – 0.5 mm
Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs.
Four-fold central impression cylinder that prints all 4 colors in one gripper closure.

Itodpfxouf Sy Aj Acyen
1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition.
Offered strictly on an 'as is, where is' basis.
Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible.

Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations.

The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued.

The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine.
If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions.
All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF.

Technical Data
- Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.)
- Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.)
- Paper size min.: 500 × 700 mm (19.68 × 27.56 in.)
- Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.)
- Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.)
- Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.)
- Speed max.: 4,000 sheets/h
- Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.)
- Press height: 230 cm (90.55 in.)
- Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs)
- Total power requirements: approx. 50 kW
- Compressed air supply: 6 – 7 bar

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.