Universal testing machine

ZwickRoell AllroundLine 50 kN

TECHNICAL DETAILS
Load Cells: 2 units Xforce K
Testing Software: testControl II & testXpert III
Load Cell: Xforce K
Measuring Amplifier: DCSC module
Documentation: available

FURTHER TECHNICAL DETAILS - as per documentation, no guarantee
Maximum Test Force Fmax: 50 kN 
Total Height of Test Space: 1,534 mm
Height of Lower Test Space without Fixtures: 1,355 mm
Height of Upper Test Space without Fixtures: 1,369 mm

An additional crosshead is required for the upper test space.
Test Space Width: 440 mm

Load Frame
Load Frame Height without Uprights: 1,714 mm
Load Frame Height with Uprights: 1,829–2,694 mm
Load Frame Width without Uprights: 760 mm
Load Frame Width with Uprights: 936 mm
Load Frame Width with Uprights and Machine Electronics: 1,124 mm
Load Frame Depth: 140 mm
Load Frame Depth without Uprights and with Drive Base: 507 mm
Load Frame Depth with Uprights: 762 mm
Load Frame Depth with Uprights and Machine Electronics: 765 mm

Weight and Footprint
Weight with Machine Electronics, Uprights, and typical fixtures: approx. 300 kg
Pure Footprint: 0.01 m²
Load Frame Base Area: 0.713 m²

Average sound pressure level at maximum speed, measured 1 m from the machine front: 61 dB(A)

Drive
Crosshead Speed: min. 0.0005 mm/min up to max. 600 mm/min
Crosshead Return Speed: max. 1,000 mm/min
Deviation from Set Drive Speed: max. 0.05% of actual value
Drive Travel Resolution: 0.317891 nm
Positioning Repeatability without Directional Change: ±2.0 µm

Adaptive Control
Cycle Time: 1,000 Hz

Power Supply
CEE 7 (Schuko) mains connector
Mains Connection: 230 V, 1 Ph/N/PE
Power Consumption at Full Load: approx. 2.3 kVA
Mains Frequency: 50/60 Hz
Mains Cable Protection: 16 A

Safety Functions
The drive is equipped with a mechanical holding brake.
When switched off, in the event of emergency stop activation, or during a power failure, the materials testing machine remains at its current position.
Unintended release due to the energy stored in the specimen is prevented.