Edge banding machine

SCM minimax me 35 tr s a

With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment.

Panel thickness: 8 – 50 mm
Edge thickness: 0.4-3 mm (coil material)
Jointing unit: Yes
Radius milling unit: Yes
Corner copying unit: Yes
Scraper: Yes
Buffing unit: Yes
Premium equipment for high productivity with minimal space requirements!
Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol.

Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction
Monoblock steel construction ensures high stability and rigidity of the machine
Automatic unit positioning when changing panel thickness
Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12
Panel feed via feed chain with rubber sliding shoes
Extendable workpiece support
Adjustment of infeed fence via spacer plates

Dimensions and Weights
Length (product) approx. 3314mm
Width/depth (product) approx. 1085mm
Height (product) approx. 1300mm
Lrsdpfexxvanjx Abrow
Weight (net) approx. 623kg

Flush radius milling unit
Rated output: 2 x 0.35kW
Cutter diameter: HW55.3mm
Spindle speed: 12000min⁻¹
Extraction port diameter: 60mm
Number of extraction ports: 2

Corner copying unit
Rated output: 0.35kW
Tool diameter: 58mm
Speed: 12000min⁻¹

Electrical data
Connection voltage: 400V
Mains frequency: 50Hz

Glue unit
Glue pot rated output: 0.25kW
Glue pot operating temperature: 190°C
Glue pot extraction port diameter: 60mm
Glue pot capacity: 0.8kg

Pneumatic connection
Operating pressure: 6.5bar
Air consumption: 470l/min

Feed
Feed rated output: 0.55kW
Feed speed: 7m/min

Edges
Edge thickness (coil material): 0.4 – 3.0mm

Pre-milling unit
Extraction port diameter: 2 x 80mm
Rated output: 3kW
Cutter speed: 7200min⁻¹
Diamond cutter diameter: 80mm
Cutter height: 56mm
Material removal: 0.5 / 1 / 1.5 / 2mm

Scraper units
Radius scraper: 2mm

Buffing unit
Rated output: 2 x 0.14kW
Speed: 2800min⁻¹

Workpiece
Workpiece thickness: 8 – 50mm
Minimum workpiece length: 120mm
Minimum workpiece width: 110mm

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.