5-axis CNC machining center

Maka PE 75

5-Axis CNC Machining Center

Used machine

Year of manufacture: 2008

Condition: Still in production

Features and technical specifications:

CNC control: Siemens 840 D

Max. travel of controlled axes:
X = 1800 mm
Y = 6590 mm
Z = 460 mm
A = +- 90 degrees
C = +- 270 degrees

HSD milling unit with 10 kW, liquid-cooled
Stepless speed control up to 24,000 rpm
Permanent grease lubrication
Tool holder: HSK 63F

1 multi-spindle drilling unit with pneumatic pre-stroke, mounted on the milling unit.
16 individually selectable vertical drilling spindles
1 double horizontal drilling spindle in X-direction, and 1 identical in Y-direction
Drill holders: each with 10 mm diameter

Note: Maximum workpiece height machinable with drilling unit = 900 mm, referenced to X/Y spindle

Ppedpfx Asx Enqzsf Uel
Milling and drilling units with dust extraction connection 200 mm diameter, each with pneumatic shut-off valve, combined connection to customer's extraction unit, 300 mm diameter

Tool changer:
1 drum tool magazine for 5-axis milling unit, 20 slots for tool diameters up to 90 mm or max. 160 mm with sorted placement, max. tool length 160 mm.
One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 magazine positions.
Special tool lengths up to max. 180 mm possible with corresponding reduction of working area. Maximum tool weight 6 kg (incl. HSK holder). Total magazine weight approx. 60 kg. Magazine positioned at the output side of the unit.

Machine table:
8 support traverses, manually adjustable along machine length, each traverse with 1 retractable workpiece stop, fixed towards operator.
Table surface can be divided into two clamping setups, per station:
- 1 length stop, pneumatically adjustable (up/down)
- 2 pneumatically adjustable glide rails (up/down)
- 1 vacuum clamping circuit

Workpiece positioning:
1 Maka laser system

Workpiece clamping:
1 vacuum pump 128 m³/h, dry-running, with intermediate tank, 250 liter capacity.
16 vacuum suction cups, 110 mm diameter
Suction cup assortment for stair manufacturing incl. touch valve.
1 clamping device for posts/curved components

Including chip conveyor

Including NC-Hops 5 Wop system

Including bumper safety device at front, and fence at side and rear

Central lubrication

Rated power: 21 kW
Fuse protection: 63 A

Availability: approx. March 2026
Location: Westerwald

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.