Label finishing and die-cutting machine

LEMORAU MEBR+ 400

The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode.

Standard equipment:
- Maximum rotary speed 200 m/min (656 ft/min) – label stock
- Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit
- Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit
- Web width 250, 330, 400 mm (10, 13, 16 in)
- Electronic counter (label/meter/roll counter as well as total meter and label counter)
- Adjustable splicing table with pneumatic clamps
- Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials
- Automatic web tension control via servo motors – constant and decreasing tension
- Memory for 250 jobs for easy and quick job setup
- 6 sets of round knives with lateral adjustment
- 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in)
- Detection of paper and liner tears
- Rewinding on label entry/label exit
- Remote support via internet connection
- Automatic stop at the end of the master roll with programmable roll-end function
- Semi-automatic rewinding
- Foot pedal for step-by-step machine control
- Multilingual touchscreen
- Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode
- Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode
- Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts
- Maximum unwind diameter: 700 mm (27.5 in)
- CE conformity certificate
Crjdpfszqnxtox Acyef

Optional equipment:
1 Anti-static bar
1 “Clear-on-Clear” sensor
1 Corona treatment
1 Speed package (80 m/min in semi-rotary mode)
1 Turret unwinder
2 Flexo unit for spot coating with rotating register
1 Web cleaner
QRC (Quick Remote Connection)
1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode
approx. 700 die-cutting sheets

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.