Die-cutting machineSanwa
TRP-1150-SCB
Die-cutting machine
Sanwa
TRP-1150-SCB
سال ساخت
۲۰۲۵
وضعیت
جدید
موقعیت
Schwalmtal 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Die-cutting machine
- تولید کننده:
- Sanwa
- مدل:
- TRP-1150-SCB
- سال ساخت:
- ۲۰۲۵
- وضعیت:
- نو
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Vogelsrather Weg 53, 41366 Schwalmtal, DE
تماس بگیرید
جزئیات فنی
- عرض کل:
- ۶٬۴۰۰ میلیمتر
- طول کل:
- ۷٬۸۰۰ میلیمتر
- ارتفاع کل:
- ۲٬۵۰۰ میلیمتر
- وزن کل:
- ۳۰٬۰۰۰ کیلوگرم
جزئیات پیشنهاد
- شناسه آگهی:
- A16575686
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۳.۱۰.۱۴۰۳
توضیحات
New machine
Machine for punching, embossing, waste stripping and depaneling
Specification:
Sheet format max. 830 x 1,150 mm
Sheet size min. 450 x 550 mm
Maximum punching force 3.0 MN (300t)
Speed 7,000 Bg/h
Processable materials:
Paper min. 80 g/m²
Cardboard up to 2,000 g/m²
Corrugated cardboard up to 4 mm
Features:
manual non-stop feeder
Automatic pile alignment at the feeder
10" inch display at the feeder
Automatic non-stop roll cloth in the feeder
stripping station
Blank separating station
Centerline
Automatic separating sheet inserter to stabilize the panel stacks
Quick-clamping frame stripper upper tool and central stripping board
Quick-clamping frame blanking station upper and lower tool
Pneumatic clamping frame and punching plate lock
APC 1 - automatic punching pressure system
Kedpfx Agst H Nhhsnodu
APC 2 - platen tilting at the platen exit
1x 4mm cutting plate incl. 10x 1mm cutting plates
2x 5mm cutting plate
1x Quicklock clamping frame
2x clamping frame without Quicklock
QTM fine adjustment of cutting plate
Sheet monitoring in each station with 2 sensors
Incl. platform
1 tool set (Bobst system)
Delivery time: 6-8 months
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Machine for punching, embossing, waste stripping and depaneling
Specification:
Sheet format max. 830 x 1,150 mm
Sheet size min. 450 x 550 mm
Maximum punching force 3.0 MN (300t)
Speed 7,000 Bg/h
Processable materials:
Paper min. 80 g/m²
Cardboard up to 2,000 g/m²
Corrugated cardboard up to 4 mm
Features:
manual non-stop feeder
Automatic pile alignment at the feeder
10" inch display at the feeder
Automatic non-stop roll cloth in the feeder
stripping station
Blank separating station
Centerline
Automatic separating sheet inserter to stabilize the panel stacks
Quick-clamping frame stripper upper tool and central stripping board
Quick-clamping frame blanking station upper and lower tool
Pneumatic clamping frame and punching plate lock
APC 1 - automatic punching pressure system
Kedpfx Agst H Nhhsnodu
APC 2 - platen tilting at the platen exit
1x 4mm cutting plate incl. 10x 1mm cutting plates
2x 5mm cutting plate
1x Quicklock clamping frame
2x clamping frame without Quicklock
QTM fine adjustment of cutting plate
Sheet monitoring in each station with 2 sensors
Incl. platform
1 tool set (Bobst system)
Delivery time: 6-8 months
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2012
ارسال درخواست
تلفن & فکس
+49 2163 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است