Edge banding machine

LANGE Maschinenbau B 95 KFE L-Motion

One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion)

Edge material:
- Roll stock 0.4 - 3 mm
- Solid wood strips up to 5 mm

Workpiece thickness: 10 - 60 mm
Minimum workpiece length: 120 mm
Minimum workpiece width: 75 mm
Minimum workpiece width with corner copying: 170 mm

Feed speed: 16 m/min
With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min

Aggregate equipment:

RIEPE separating agent application

Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads
Extra: Diamond milling tools, 65 mm height instead of 30 mm

Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips

Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg
Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue
Extra: Quick-change glue pot system

Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers

End trimming unit with 2 HF motors, 0.55 kW,
pneumatically tiltable 0 - 10 degrees, controlled from the operator panel

Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm
L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller
Extra: nesting package for combined milling unit

Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness
(not recommended for soft- & postforming profiles)
with 2 motors, 0.27 kW each
2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning

Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors
Extra: nesting package for radius scraper

Flat scraper unit with pneumatic in/out control from the operator panel

RIEPE cleaning agent spray device

Buffing unit with 2 motors, 0.09 kW each

Bedpsxugplefx Aahjlp
Control system:
18.5-inch graphic touchscreen with L-Motion software
Extra: potential-free contact for connection to a return conveyor

Total machine length: 4,890 mm

The machine is being replaced due to insufficient capacity

The return conveyor system visible in the photos is not included in the scope of delivery.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.