Single-sided edge-banding machine

IMA NOVIMAT I/G80/540/R3

Used single-sided IMA edge banding machine for straight edges; for jointing, gluing, and finishing various edge materials. Fixed stop side on the right.

WORKPIECE & MATERIAL DIMENSIONS:
Min. workpiece length : 150 mm
Min. workpiece width : 65 mm
Min. workpiece thickness : 8 mm
Max. workpiece thickness : 40 mm (with corner rounding / copy function)
Max. workpiece thickness : 60 mm (without corner rounding / copy function)
Smallest workpiece : 150 x 150 mm, or 300 x 65 mm
Workpiece overhang : 38 mm
Edge thickness min/max : 0,3 – 3,0 mm
Edge width min/max : 14 – 65 mm

EQUIPMENT / SPECIFICATION
BASIC MACHINE
- Basic machine with 80 mm wide conveyor chain as workpiece transport device
- Feed speed 6 to 30 m/min, adjustable from machine control
- Top pressure with pressure-loaded guided rollers and 70 mm wide V-belt
- Automatic height-adjustment of top pressure (thickness)
- Workpiece support with rollers, extendable up to approx. 700 mm
- Infeed table IMA 63.152, 500 x 500 mm, for easy feeding of long & narrow boards
- Infeed device (manually) tiltable, with 5 driven rollers from top
- Adjustable infeed guide/fence via NC axis

AGGREGATES / EQUIPMENT
- JOINTING TRIMMING/pre-milling (08.378), 2x4.5 kW, controlled (jumping), tool-Ø 125 mm
Electronic horizontal positioning
- GLUING AGGREGATE 04.1570 Concept, driven glue roller with automatic feed stop in case of error,
Quick-lock system for glue application unit, Glue roller lift-off when feed stops
Edge feed controlled by light barrier, upper edge guide w. step-motor, electronically controlled
- Automatic PUR pre-melting system 283.203
- 6-fold automatic roll-change edging magazine
POST-PROCESSING SECTION
- End-trimming (snipping) unit 08.42, horizontal version, 2 motors each 0,65 kW, 200 Hz
For straight and chamfer cutting, max. working speed 30 m/min
- Fine trimming unit 08.055, 0,66 kW 400V 200Hz, top/bottom, HSK 25
- Corner rounding 08.348, 2 motors 0,66 kW 400V 200 Hz, HSK 25
Max. working speed 20 m/min
- Profile scraper 08.516, top/bottom, for multi-profile-knives, automatic positioning by
step motors, max. 4 profiles, with electro pneumatic horizontal move-in/-out
- Spraying devices for cleaning agent.
- Flat scraper 08.521 (glue joint scraping), top/bottom
- Profile (corner-) buffing 08.604, 4 motors
- Buffing unit 08.617, top/bottom

CONTROL / SOFTWARE:
Dsdpfowyp Nuox Afnscn
• Control system ICOS open compact
• Flexible edge control
• Uninterrupted power supply (UPS)
• Power supply 400 V, 50/60 Hz, Control voltage 24 VDC / 230 VAC

Machine dimensions (occupied area when installed)
L 1150 x W 300 x H 260 cm

Available: October 2025