Laser and PU edge banding machineHomag
Profi KAL 330/10/A6/L
Laser and PU edge banding machine
Homag
Profi KAL 330/10/A6/L
سال ساخت
۲۰۱۳
وضعیت
کارکرده
موقعیت
Weil am Rhein 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Laser and PU edge banding machine
- تولید کننده:
- Homag
- سال ساخت:
- ۲۰۱۳
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- 79576 Weil am Rhein, Deutschland
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A20101260
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۸.۰۷.۱۴۰۴
توضیحات
Single-sided laser and PU edge banding machine including workpiece return system Ligmatech
Manufacturer: Homag
Edge banding machine type: PROFI KAL 330/10/A6/L
Return system type: ZHR05/L/115
Year of manufacture: 2013
- Laser activation unit Performance
- PU65 application unit
- Balti melting device
- Feed rate 18-25 m/min
- FK31/20-cycle Powertrim
- FK31/F
Feed rate: 15 – 25 m/min
Workpiece thickness: 8 – 60 mm
Minimum workpiece width: 60 mm
Edge material (roll): 0.3 – 3 mm
Edge material (strip): 0.4 – 20 mm
Control: PC22
Control system: Powertouch
Units and gluing
Jointing cutter unit S2
Automatic horizontal adjustment for jointing cutter
Automatic vertical adjustment for jointing cutter
LaserTec activation unit Performance
Basic gluing station A20, extension module
Magazine extension for 6 rolls
Freestanding horizontal roll plate
Continuously adjustable edge pressure device
Vacuum device for strip singulation
Servo edge feed
Edge thickness measurement for coiled material
Quick-change system for application unit QA/PU
PU65 application unit (interchangeable)
Automatic glue dosage adjustment
Balti melting device
Automatic pressure zone adjustment
Wetting system for pressure zone
Release agent spraying unit top/bottom
End trimming unit HL86 bevel/straight 0.22 kW servo
Pneumatic adjustment for end trimming motor
Automatic adjustment for end trimming stop
Pre-milling unit BF20
Pneumatic adjustment for pre-milling unit
Multi-milling unit MF21 servo
Release agent spraying unit top
Profile trimming unit FK31/20-cycle Powertrim
Profile trimming unit FK31/F
Multi-scraper MN21 servo with chip breaker
Finishing unit FA11 top/bottom, consisting of
Glue joint scraper
Cleaning agent application top/bottom
Buffing unit
Pneumatic adjustment FA11
Additional equipment
Edge banding of solid wood edges
Automatic adjustment of infeed fence
Infeed extension 500 mm
Sliding carriage
Scissor-type workpiece support
Scissor extension
Workpiece thickness 8 mm instead of 12 mm
Potential-free contact
Flexible edge sequence control software
Set-up-in-the-gap
Workpiece return system ZHR 05/L/115
Manufacturer: Ligmatech
Year of manufacture: 2013
Workpiece parameters
Length: min. 300 – max. 2500 mm
Width: min. 60 – max. 1100 mm
Dcjdpjxgrfpsfx Afnsn
Thickness: min. 8 – max. 60 mm
Weight: max. 50 kg
Feed rate: 8 – 30 m/min
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Manufacturer: Homag
Edge banding machine type: PROFI KAL 330/10/A6/L
Return system type: ZHR05/L/115
Year of manufacture: 2013
- Laser activation unit Performance
- PU65 application unit
- Balti melting device
- Feed rate 18-25 m/min
- FK31/20-cycle Powertrim
- FK31/F
Feed rate: 15 – 25 m/min
Workpiece thickness: 8 – 60 mm
Minimum workpiece width: 60 mm
Edge material (roll): 0.3 – 3 mm
Edge material (strip): 0.4 – 20 mm
Control: PC22
Control system: Powertouch
Units and gluing
Jointing cutter unit S2
Automatic horizontal adjustment for jointing cutter
Automatic vertical adjustment for jointing cutter
LaserTec activation unit Performance
Basic gluing station A20, extension module
Magazine extension for 6 rolls
Freestanding horizontal roll plate
Continuously adjustable edge pressure device
Vacuum device for strip singulation
Servo edge feed
Edge thickness measurement for coiled material
Quick-change system for application unit QA/PU
PU65 application unit (interchangeable)
Automatic glue dosage adjustment
Balti melting device
Automatic pressure zone adjustment
Wetting system for pressure zone
Release agent spraying unit top/bottom
End trimming unit HL86 bevel/straight 0.22 kW servo
Pneumatic adjustment for end trimming motor
Automatic adjustment for end trimming stop
Pre-milling unit BF20
Pneumatic adjustment for pre-milling unit
Multi-milling unit MF21 servo
Release agent spraying unit top
Profile trimming unit FK31/20-cycle Powertrim
Profile trimming unit FK31/F
Multi-scraper MN21 servo with chip breaker
Finishing unit FA11 top/bottom, consisting of
Glue joint scraper
Cleaning agent application top/bottom
Buffing unit
Pneumatic adjustment FA11
Additional equipment
Edge banding of solid wood edges
Automatic adjustment of infeed fence
Infeed extension 500 mm
Sliding carriage
Scissor-type workpiece support
Scissor extension
Workpiece thickness 8 mm instead of 12 mm
Potential-free contact
Flexible edge sequence control software
Set-up-in-the-gap
Workpiece return system ZHR 05/L/115
Manufacturer: Ligmatech
Year of manufacture: 2013
Workpiece parameters
Length: min. 300 – max. 2500 mm
Width: min. 60 – max. 1100 mm
Dcjdpjxgrfpsfx Afnsn
Thickness: min. 8 – max. 60 mm
Weight: max. 50 kg
Feed rate: 8 – 30 m/min
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2011
ارسال درخواست
تلفن & فکس
+49 711 5... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است