Edge banding machine

HOLZHER ARCUS 1336

Edge banding machine for edging and post-processing of panel materials

Edge thickness for rolls: 0.4 - 3 mm
Edge thickness for strips: 8 mm
Max. 15 mm possible with tool change on the milling unit 1826

Edge height: max. 65 mm
Workpiece thickness: 6 - 60 mm
Workpiece width: min. 60 mm
Workpiece length: min. 160 mm
Feed speed: stepless 10 - 20 m/min
Djdpfx Afjxggmbotoku

Control unit PPC 221 – with 8.4" VGA color screen
Motorized adjustment of the infeed fence, adjustable via control unit

Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm)

Edge feed 1901 SYNCHRO
Automatic feeding of roll and strip material

Glue application system Glu Jet GJ301 automatic
Automatic glue height adjustment (contact nozzle)
Glu Jet hybrid technology – for processing EVA and PUR adhesives
Glue application via nozzle technology
Heat-up time: 3 minutes
Glue granulate container 5 kg for GJ301

PRESSURE UNIT – Pressure section 1914-1 MOT

END-TRIMMING UNIT – End-trimming unit KA 701 pneumatic
(2 x 0.65 kW, 200 Hz, 12,000 rpm)
Pneumatic swivel function 0/10° for coils and strips

MULTIFUNCTIONAL END-TRIMMING UNIT
End-trimming unit 1826 MOT4 (2 x 0.65 kW)
with 4 NC servo drives for flush, radius, and chamfer cuts

CORNER ROUNDING UNIT
Profile milling unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12000 rpm)
Milling the top and bottom longitudinal edges, copy milling of the upper and lower front and rear longitudinal edges, corner rounding, postforming of corners with 4 adjustment motors

SCRAPING UNIT 1927 MOT5
Carbide reversible blades for scraping knives 1929
R = 2.0 mm (2 pieces required)

FLAT SCRAPER 1964
For removing excess glue to achieve a clean glue joint

BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm)
For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs

GROOVING UNIT 1841
1 x 3.8 kW, 200 Hz, 12,000 rpm,
Saw blade Ø 160 mm,
Cutting width 4–9 mm

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.