Edgebander

HOLZ-HER SPRINT 1327 Classic

For inquiries:
Zoltán Utasi
+36 30 205 7380

• motorized pressure bridge adjustment
• Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW
• “Control PPC 221 – with 8.4'' VGA color display”
High-performance control with very simple operation
• Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm)
with 2 milling units for pre-milling the panel edge
• Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation
For pre-milling unit 1801 / 1802
• Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation
For pre-milling unit 1801 / 1802
• Edge feeding unit 1903 SYNCHRO
Dsdpfsx Huhcsx Ahkskp
automatic transport of rolls and strip material
• Glue application station Glu Jet GJ301 automatic
(2.3 kW, 50 Hz)
• Pressure unit 1913 pneumatic
first roller driven, 2 additional pressure rollers with pneumatic individual control
• Cut-off unit 1918 (60 mm) pneumatic
(2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10°
• Multifunction milling unit 1827 pneumatic
(2 x 0.65 kW, 200 Hz, 12,000 rpm)
• Vertical tracing rollers manual
manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges
• Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation
Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E
• Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation
Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E
• Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm
• Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm,
with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832
• Scraper unit 1929 pneumatic
including pneumatic adjustment (separately for top and bottom)
• HW reversible knives for scraper holder 1929 / 1927
R = 2.0 mm (2 pcs required)
• Flat scraper unit 1964
Removing glue residue for a clean glue joint.
• Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm)
For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°