Edge banding machine

Hebrock AKV 3006 DK-F

AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing cutter unit, including DIA tooling. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station with radius R 2.5 mm.

Technical specifications:
- Hot-melt glue application to the workpiece for edge material up to 3 mm.
- 60 mm workpiece thickness without jointing aggregate, 40 mm with jointing aggregate.
- Maintenance-free, coated glue pot.
- HF end trimming station (16,000 rpm) for front and rear edge overhang.
- HF milling station (16,000 rpm) with replaceable insert cutter (combination type) and fine adjustment accessible from the operator side.
- Spaces available for additional processing units (Hebrock system).
- Feed rate approx. 10 m/min.
Fsdpsxl Rmcofx Ahxjgh
- Adjustable cutting depth for trimming saw.
- Signal lamp for workpiece sequence.
- Robust chain drive.
- Ergonomically arranged control panel.
- Double roller top pressure beam.
- Viewing windows for aggregates from both rear and operator sides.
- PLC control including touchscreen.

Technical data:
- Feed speed: 10 m/min
- Panel thickness: 8 - 40 mm
- Weight: approx. 1550 kg depending on equipment
- Dimensions (L x W x H): 5250 x 1445 x 1600 mm

Airtronic including cooling and anti-static spray unit, 2014, 1 unit hot air aggregate for creating the optical zero-joint using special edge materials intended for this purpose. Including:
- Pneumatic glue pot positioning
- Cooling and anti-static spray unit
- Two additional quick-change edge channels
- Special version for corner rounding unit, max. workpiece thickness 60 mm, minimum workpiece length 200 mm
- Exclusively for Hebrock edge banding machines of the 3000 series
- Retrofitting possible later (additional costs on request)

Technical data (Airtronic & corner rounding unit):
- Max. panel thickness: 40 mm
- Max. edge thickness: 1.2 – 2.0 mm
- Feed speed: 7 – 10 m/min
- Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled
- Operational in approx. 2 minutes
- Special version, minimum workpiece thickness 8 mm

Further accessories and upgrades available on request:
- Airtronic retrofitting on PLC machines, only possible at the Hüllhorst–Oberbauerschaft factory
- Upgrade to edge thickness 8 mm, up to max. workpiece thickness 40 mm, with pneumatic saw adjustment
- Special infeed fence for overlaid panels, 16 mm and 19 mm thickness, max. glue overhang 8 mm, separate pneumatic milling cutter adjustment (straight/radius) controllable from operator panel
- Buffing station (swabbel), 1 unit
- Corner rounding unit, 1 unit, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm
- Ball bearing for corner rounding cutter 24.1 mm: 1 unit
- Ball bearing for corner rounding cutter 24.2 mm: 1 unit
- Corner rounding unit for 60 mm workpiece thickness: 1 unit
- Quick-change device for the corner rounding unit: 1 unit
- Exchange motor 0.37 kW for the corner rounding unit: 1 unit, including terminal box with electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or optionally Siko counter, including R 1.0 mm radius cutter, 24.1 mm bearing for corner rounding unit: 1 unit, 24.2 mm: 1 unit
- Radius scraper: 1 unit with pneumatic lift-off device, radius R 2.0 mm and R 1.0 mm
- Flat scraper: 1 unit with pneumatic insertion control
- Glue station changeover system including glue outlet device downward (preparati

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.