Carcase press

Ganner Gannomat Concept 70

LAMELLA - CARCASE PRESS
GANNOMAT « CONCEPT 70 ECO »
Complete in standard configuration with:
- Sturdy, torsion-resistant frame made of steel in welded and bolted construction
- Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements
- Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints
- Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels
Podpfoxvitisx Ab Derd
- Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam
- Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir
- Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW)
- The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control
- Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg)
Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg)
Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second
Very easy operation
- Working height/loading height: 300 mm
- Working dimensions: length min: 150 mm, max: 2500 mm
height min: 150 mm, max: 1400 mm
depth: 700 mm
Machine No. 563.624
400V, 3Ph, 50Hz (3.2 kVA, 16 A)

Set of machine feet for 500 mm working height

Operating manual in German language
Completely overhauled by Ganner, 6 months parts warranty

Location: Ex stock 54634 Bitburg
- immediately available -

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.