Carcase press

Ganner / Gannomat Concept 70 Eco

Gannomat Concept 70 Eco
Lamella - carcass press with rapid traverse

Technical data:
Lamella carcass press from our showroom;
Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm;

- lamella press beam top with 6 elements, lamella press beam side with 5 elements
- lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints
- Counterpressure surfaces are 40 mm thick, coated continuous support plates
- The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free.
Kdedjiidm Nepfx Aabsw
- Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg)
- Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg)

- Including option:

Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec.
and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts.
- Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees.

Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm.

Machine is in our showroom and can be delivered immediately.

Location: ex stock 54634 Bitburg
- immediately available -

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.