Carcase press

Gannomat / Ganner Concept 70 Eco sofort verfügbar

LAMELLA – CASE CLAMP PRESS
GANNOMAT “CONCEPT 70 ECO”
Complete in standard configuration including:
- Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies
- UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements
- Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints
- Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates
- Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam
- Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir
- Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW)
- The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control
- Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg)
Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg)
- Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec
- Extremely user-friendly operation
- Working height/loading height: 300 mm
- Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm
- Machine No. 563.624
- 400V, 3Ph, 50Hz (3.2 kVA, 16 A)

Set of machine feet for 500 mm working height

Operating manual in German
Overhauled by Ganner, with 6-month parts warranty
Kfedpjw Td A Ijfx Afpja

Location: ex stock 54634 Bitburg
- Immediately available -

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.