Complete sawmill (stationary)

EWD Sägeline Runholzplatz Stapelung EWD ZE, FZ3, FR12, FV20,

1) Log Yard with 10 Boxes (Drop Boxes) – New and Used

Log Feed and Sorting Line New
Feed rate 50 m/min. as well as the following used components:
Comprising:
New cross feed conveyor, step feeder
Used log transfer carriage,
Used log transfer carriage with ejector,
Used Cambio 50 debarker,
Used split detection unit with belt,
Measuring section, sorting log carriage.
Including debarking;
Inspection and
Painting; including log infeed. Without boxes, sheet metal cladding, measuring system,
discharge control, or control cabinet. Root reduction.

2) Log Infeed for Canter Line

Bdjdpfxeykr Aqj Adlec
Heavy-duty cross log conveyor NEW
Cross log conveyor in 4-strand execution
Axle spacing: 7.5 m
Total length: 8.0 m
Drive shaft: 100 mm diameter
Chain: Bush conveyor chain, pitch 100 mm – heaviest version
Fixed rear stops,
without sheet metal cladding
Steel substructure: HEB 200
Construction height: 1000 mm
Drive: geared motor 7.5 kW

3) Equalizer NEW

Number of chains: 4
Axle spacing [mm]: 3500
Overall width [mm]: 5730
Paddle spacing [mm]: 1000
Drive shaft diameter [mm]: 100
Drive SEW [kW]: 7.5
Speed [m/min]: 10
Design: completely sheet metal covered between chain runs

4) Step Feeder NEW

Feed steps: 4
Overall width [mm]: 4200
Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm
Drive SEW [kW]: 18.5
Drive via crank mechanism and geared motor

5) Canter Line (WD brand)

Log transfer carriage before RB 2 infeed
Length extension to 18.5 m – drive and deflection

RB 2 infeed
with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction.
Intake and centering unit ZE
with log rotation unit TDV and centering device.
Feeding unit ZE
Log length: 2.5 – 5 m
Clear width: min. 80 mm
Clear width max.: 780 mm
Construction height: 1000 mm
Weight: 5400 kg

Profile canter FZ 3
Machine frame with base frame
2 knife head housings with main shaft bearing,
2 knife heads with finishing segments,
Drive power 90 kW
Log diameter: min. 100 mm, max. 400 mm
Chipping height above the chain max. 515 mm
Distance between disks max. 570 mm
Distance between disks min. 60 mm
Disk diameter: 1260 mm
Positioning via electric motors

2 hydraulic units 35 kW hydraulic pre- and post-cut

Pre-cut square timber turning device

Electrically powered roller conveyor TR 800

Centering and feeding unit ZE with FZ 3 canter

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.