Planer and Thicknesser

CORMAK PT265 230V

The Cormak PT265 planer-thicknesser is a solid and well-thought-out design that offers great possibilities for adjustment and mechanical processing of both hard and soft wood. The adjustment itself is simple and changing the planer to a thicknesser takes a few seconds.

The latest version of the machine with an innovative tabletop opening system:

❌ Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects.

✔️ The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously.

✔️ This solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials.

Stable construction resistant to vibrations

The weight of the machine up to 170 kg combined with wide cast iron grinded tops 265 mm guarantees great stability, which ensures safe work.

The additional rubber feet used allow work without the slightest vibrations.

VERSION with the most powerful engine with a total power of S6: 2.6kW

The PT265 planer-thicknesser is distinguished by an exceptionally powerful engine with a total power of S6 2.6 kW (S1 2.2 kW). This is much more than competitive devices offer, which translates into greater efficiency and stability of work.

A more powerful engine means stable work and ease of processing hard materials: Hardwood requires more force for processing. A strong engine will handle this without a problem.

Trouble-free change of the planer to the thicknesser.

Switching from the planer to the thicknesser function is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover.

Work precision.

- Smooth height adjustment of the tops with a scale.

- The thicknessing table mounted centrally on the column has a knob for adjusting the setting up and down

- Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees.

Technical data:
Knife shaft diameter [mm] 75
Knife shaft speed [rpm] 4000
Suction nozzle diameter [mm] 100
Swing ruler tilt angle [°] 90 - 45
Number of knives 3
Shaft length [mm] 262
Knife dimensions [mm] 250x30x3
Maximum planer width [mm] 265
Maximum thicknesser width [mm] 265
Maximum planing height [mm] 180
Maximum thicknesser cutting depth [mm] 3
Maximum planer cutting depth [mm] 2.5
Thicknesser feed speed [m/min] 6
Fence size [mm] 700 x 150
Bodpfswu T S Aex Al Towr
Machine dimensions (length x width) [mm] 1080 x 269
Weight [kg] 170
Total engine power S6: 2.6 kW
Power supply 230V