Planer and Thicknesser

CORMAK PT250 400V

Machine features

This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet.
Advantages of the planer

Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface
Shaft guard can be freely set, adjusting its height, angle as well as extension
Angular guide can be smoothly adjusted in the 90° – 45° range
Planer tables involve additional sound dampeners decreasing noise

Advantages of the thicknesser

Thicknesser table is made of high-quality cast iron, with ground and polished surface
Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric
Its table is supported in 3 places
Thicknessing can be lowered down to 190 mm
Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements
Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece)

Technical data

Knife shaft diameter
75 mm

Knife shaft speed
4800 rpm

Extracting connector diameter
100 mm

Swinging rule tilt angle
0–45°

Number of knives
3

Maximum surface planer width
250 mm

Maximum thickness planer width
248 mm

Maximum surface planing height
Kedsvxh Nrepfx Agnonc
180 mm

Maximum thickness planer machining depth
3 mm

Maximum surface planer machining depth
2.5 mm

Thickness planer feed speed
6 m/min

Dimensions (L×W)
1080×260 mm

Weight
150 kg

Motor power
2.0 kW

Power supply
3 phase, 400V