Edgebanding machine

Brandt Profiline KDF 670-C Hiflex

Edge banding machine
Brand: Brandt
Model: Profiline KDF 670-C Hiflex
Kdsdeynhwfspfx An Hjr

Single-sided edge banding machine in right-hand design, for hot melt gluing.
Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications.
Leak-proof glue reservoir under the glue roller.
Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary.
Glue roller with selectable rotation direction for counter or forward feed.
Glue temperature monitoring via electronic thermostat.
Automatic reduction of glue temperature during work breaks.
Infrared heating for hot melt reactivation.

Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm.

Standard equipment with edge banding and workpiece – distance monitoring with optical display.

Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers.

Standard equipment with automatic central lubrication for the transport chain.
Motor-driven adjustment of overpressure.
Control panel at the machine infeed.

Technical data
Edge strip thickness: 0.4 – 12 mm
Cutting tool: max. 3.0 x 45 mm
or 0.8 x 65 mm
Workpiece thickness: 8 – 60 mm
Feed speed: 11 – 16 m/min (see below)
When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min.
automatically to 14 m/min.
When selecting form cutters, the feed rate is automatically switched to
11 m/min.
Electrical connection: 400 V, 3-phase, 50 Hz
Compressed air connection: 6 bar
Connected load approx. 17 kW
Machine length: 6,860 mm

Full information about the machine can be found on our webpage burbagemaskin.se