EDGE BANDING MACHINE LINE

BIESSE Stream line

STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER)
Year of production: 2021
Technical condition: very good

Panels: chipboard, MDF, HDF, plywood, joinery, solid wood
Coatings: ABS / PVC / laminate / veneer / lacquer / melamine
Shape: rectangular, without grooves or holes
Roughness: average < 5 µm, maximum < 35 µm
Working temperature of components: < 50 °C
Minimum density: chipboard > 650 kg/m³, MDF > 750 kg/m³

FEEDER / STACKER WINNER W1

Panel length: min. 300 mm
Panel width: min. 240 mm (double row: min. 120+120 mm), max. 1200 mm (double row: max. 600+600 mm)
Panel thickness: 10–60 mm
Panel weight: up to 100 kg
Panel flatness: ±1 mm/m (max. ±2 mm over the entire length)
Height of uniform stack on the conveyor (H=250 mm): min. 300 mm, max. 1500 mm
High-speed unit speeds: Y-axis (carriage) 210 m/min, Z-axis (suction frame) 130 m/min (+ productivity ~2 cycles/min)
Base productivity: 15 cycles/min (depending on composition/weight/gaps)
Compressed air consumption: 950 Nl/min
Installed power: 16 kW

Option: powered panel separator – air 1050 Nl/min, power 8 kW

DOUBLE-SIDED EDGE BANDING MACHINES

STREAM C SB1 (first pass)
Panel overhang beyond the conveyor: 35 mm
Panel thickness: 10–60 mm
Edge thickness: 0.3–3 mm
Edge height: 15–65 mm
Table height: 950 mm
Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm)
SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional equipment)
Fsdpfxjw R Savo Abnjgh

STREAM C SB2 (second pass)
Panel overhang beyond the conveyor (fixed): 35 mm (SB2 SOFT: 50 mm)
Panel thickness: 10–60 mm
Edge thickness: 0.3–3 mm
Edge height: 15–65 mm
Table height: 950 mm
Clamp spacing: 500 mm
Panel width: 240–1200 mm (SB2 SOFT: min 270 mm)
Panel length: 240–2700 mm

SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional tables)

GLUING UNIT SP30
Edge thickness: 0.3–3 mm
Maximum cutting section of scissors: 135 mm² (3 × 45)
Panel thickness: 10–60 mm
Edge height: 15–65 mm
Minimum edge length: 250 mm
Glue tank: 1.3 kg
Glue reservoir: 11 kg
Application capacity: 16 kg/h
Edge roll diameter: 800 mm

EDGE CUTTING LENGTH CONTROL (options)
EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm
EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm

TURNER ROTARY UNITS PT1 / PT2
Panel length: 300–3200 mm
Panel width: 200–1200 mm
Panel thickness: 10–80 mm
Maximum panel weight: 100 kg
Panel flatness tolerance: 1 mm/m
Floor flatness tolerance (area 8000 × 3000 mm): ±10 mm
Compressed air requirement: 250 L/min
Installed power: 7 kW

Installation and commissioning are available for an additional fee.