Window production centre

WEINIG, Unicontrol 11 NC mit Werkzeuge

Tenoning spindle 1 St.
Number of milling agregates 5 St.
Spindle diameter 50 mm
Weinig Unicontrol 11 Window System with Extensive Tooling
-----
Optionally available (at additional cost):
- Weinig Univar 6 Rebating Machine (Price upon request!)
- Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request)

Manufacturer's Technical Description:
-----

Item 1: Weinig Unicontrol 11 Window System
-----
Includes existing tooling sets:
- IV 67 (Wood and Wood-Aluminum)
- IV 77 (Wood and Wood-Aluminum)
- IV 90 (Wood)

Cross-cut Saw
-----
With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm;
electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm
Axial adjustment: 150 mm via NC axis
Radial adjustment: pneumatic, to 8 positions for top edge rounding

Horizontal Bottom Rounding Unit
-----
Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm
Spindle speed: 9,000 rpm
Max. tool cutting circle: 130 mm
Axial adjustment travel: mechanically coupled with cut-off saw
Radial adjustment travel: pneumatically controlled

Tenoning and Slotting Spindle
-----
With hydraulically clamped outboard bearing
Motor power with brake: 15 kW
Spindle diameter: 50 mm
Spindle speed: 2,800 rpm
Max. tool cutting circle: 400 mm
Tool clamping length: 640 mm
Axial adjustment travel: NC axis
Home position below table: 5–10 mm
Radial adjustment travel: fixed

1st Profiling Spindle (Climb and Conventional Milling)
-----
Motor power with brake: 11 kW
Spindle diameter: 50 mm
Spindle speed: 6,000 rpm
Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm
Tool clamping length: 400 mm (with outboard bearing)
Axial adjustment travel: 350 mm (NC axis)
Radial adjustment travel: NC axis
Home position below table: 5–10 mm
2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions)

Horizontal Top Profiling Unit
-----
Motor power with brake: 3.7 kW
Spindle diameter: 40 mm
Clamping length: 40 mm
Spindle speed: 9,000 rpm
Max. tool cutting circle: 130 mm
Adjustment: pneumatic, to 8 positions (axial and...) radial

2. Profile Spindle
-----
Motor power: 11 kW
Spindle diameter: 50 mm
Spindle speed: 6,000 rpm
Tool cutting circle: min. 140 mm, max. 232 mm
Tool clamping length: 400 mm (with outboard bearing)
Axial adjustment travel: 350 mm (NC axis)
Radial adjustment travel: NC axis
Home position (below table): 5–10 mm
Indexed guide fence with muntin support strip
2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions)

Vertical Profile Milling Unit (Right-hand side, at machine end)
-----
Motor power (with brake): 3.7 kW
Spindle diameter: 40 mm
Psdpfxoy T R Tuo Ad Regl
Clamping length: 160 mm
Spindle speed: 5,850 rpm
Tool cutting circle: min. 112 mm, max. 210 mm
Adjustment: Pneumatic (8 positions—axial and radial)

Horizontal Pro...