Bench boring machine / horizontal boring machineVEB Union Gera
BFT 110/6
Bench boring machine / horizontal boring machine
VEB Union Gera
BFT 110/6
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Jahnsdorf/Erzgeb 

اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- Wilhermsdorfer Straße 31, 09387 Jahnsdorf, Deutschland

تماس بگیرید
جزئیات فنی
- مسافت جابجایی محور X:
- ۲٬۰۰۰ میلیمتر
- مسافت حرکت محور Y:
- ۱٬۲۰۰ میلیمتر
- مسافت حرکت محور Z:
- ۲٬۰۰۰ میلیمتر
- ظرفیت بار میز:
- ۶٬۰۰۰ کیلوگرم
- قطر محور چرخان:
- ۱۱۰ میلیمتر
- سرعت اسپیندل (دقیقه):
- ۵ دور/دقیقه
- حداکثر سرعت اسپیندل:
- ۱٬۱۲۰ دور/دقیقه
- ارتفاع کل:
- ۴٬۳۰۰ میلیمتر
- طول کل:
- ۷٬۲۰۰ میلیمتر
- عرض کل:
- ۴٬۶۰۰ میلیمتر
- طول میز:
- ۱٬۶۰۰ میلیمتر
- عرض میز:
- ۱٬۴۰۰ میلیمتر
- طول پیشروی محور W:
- ۸۰۰ میلیمتر
- نوع جریان ورودی:
- تهویه مطبوع
- کورس اسپیندل:
- ۸۰۰ میلیمتر
- وزن کل:
- ۲۶٬۰۰۰ کیلوگرم
- سال آخرین تعمیرات اساسی:
- ۲۰۲۰
جزئیات پیشنهاد
- شناسه آگهی:
- A17819186
- شماره مرجع:
- 240020
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۶.۰۹.۱۴۰۳
توضیحات
A Union Gera BFT 110/6 horizontal boring mill is for sale
The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then.
The scope of the overhaul includes the following:
- Electrical system almost completely renewed
- New control cabinet incl. Siemens S7-200 PLC control system
- New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7
- Heidenhain TNC 124 line control + electronic handwheel
- Heidenhain length measuring systems on X, Y and Z axes
- Heidenhein angle measuring device in B-axis (rotary table)
- Spindle drive three-phase asynchronous with DC brake electronics
- Renewal / overhaul of all hydraulic components
- New KGT in X and Y axes
- Overhaul of the drive systems of all feed axes
- All axles were rescraped
- Lubrication systems of axes and headstock overhauled
- New bearings and overhaul of the gear components of the headstock
For further technical details see photos or on request.
Gsdpfx Aeu U Hvwjctska
Equipment of the machine:
- Heidenhain TNC 124 line control + electronic handwheel
- Facing slide (U-axis)
- Electric tool clamp SK 50
The sale is due to capacity reasons.
The machine is fully functional and immediately available.
It achieves production accuracies according to the manufacturer's protocol.
Technical documentation is available.
The machine is fully functional and, by prior arrangement, can be inspected under power.
The offer is subject to our terms and conditions of business and delivery.
Subject to errors and prior sale.
As a warranty is excluded for the purchase of used machines, we recommend that our
our customers to inspect the machine before making a purchase.
As is customary with used machines, payment is made by bank transfer before delivery of the goods.
bank transfer.
Dismantling, relocation, installation, commissioning and geometric adjustment at the new location,
can be carried out by us on request.
We will be happy to submit a separate offer for this.
Delivery of the machine to other EU countries is also possible on request.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then.
The scope of the overhaul includes the following:
- Electrical system almost completely renewed
- New control cabinet incl. Siemens S7-200 PLC control system
- New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7
- Heidenhain TNC 124 line control + electronic handwheel
- Heidenhain length measuring systems on X, Y and Z axes
- Heidenhein angle measuring device in B-axis (rotary table)
- Spindle drive three-phase asynchronous with DC brake electronics
- Renewal / overhaul of all hydraulic components
- New KGT in X and Y axes
- Overhaul of the drive systems of all feed axes
- All axles were rescraped
- Lubrication systems of axes and headstock overhauled
- New bearings and overhaul of the gear components of the headstock
For further technical details see photos or on request.
Gsdpfx Aeu U Hvwjctska
Equipment of the machine:
- Heidenhain TNC 124 line control + electronic handwheel
- Facing slide (U-axis)
- Electric tool clamp SK 50
The sale is due to capacity reasons.
The machine is fully functional and immediately available.
It achieves production accuracies according to the manufacturer's protocol.
Technical documentation is available.
The machine is fully functional and, by prior arrangement, can be inspected under power.
The offer is subject to our terms and conditions of business and delivery.
Subject to errors and prior sale.
As a warranty is excluded for the purchase of used machines, we recommend that our
our customers to inspect the machine before making a purchase.
As is customary with used machines, payment is made by bank transfer before delivery of the goods.
bank transfer.
Dismantling, relocation, installation, commissioning and geometric adjustment at the new location,
can be carried out by us on request.
We will be happy to submit a separate offer for this.
Delivery of the machine to other EU countries is also possible on request.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2022
۴ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 37296... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
București
۲٬۷۳۵ km
TITANSC43CNC
آگهی کوچک
București
۲٬۷۳۱ km
WMWZFWZ 6300x40
آگهی کوچک
Metzingen
۴٬۰۹۲ km
Deckel MahoDMU 50 M - TNC 124
آگهی کوچک
آلمان
۳٬۹۴۶ km
StrandsS 25
آگهی کوچک
Salzhausen
۴٬۱۴۹ km
MTU12V396
آگهی کوچک
Fuente de Cantos
۵٬۳۹۲ km
cincinnati2M2
آگهی کوچک
Dietzenbach
۴٬۱۵۶ km
HAUR60
آگهی کوچک
Iszkaszentgyörgy
۳٬۴۰۵ km
KnuthTurnado 230 x 1500
آگهی کوچک
Babberich
۴٬۳۷۷ km
TacchiHD3/140L
آگهی کوچک
Bühl
۴٬۱۷۷ km
HEYLIGENSTAEDT400 Ea/4000
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است






































































































