Tensile Testing Machine-Universal Testing Machine

Richard Hess MBV GmbH H3000-H5000TM mit Langwegextensometer

Universal Testing Machine

H3000TM-H5000TM according to DIN EN ISO 7500

The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive.
The bellows cover protects the spindle and guides.
The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface.
The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration.
Optionally, a second channel can be added for a second force transducer or a displacement sensor.
The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool).

Further scope of supply:
A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity.

Further information can be found in the attached description.

Force transducer 3000N-5000N
Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V
Output signal, overload protection: +/- 1000%, linearity: +/-
0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%,
with, incl. 1.5m connection cable incl. calibration certificate.

Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics.

Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513

Measuring principle optically incremental
Itsdpfx Asiq Hxksfaji
Measuring path 900 mm, less the measuring length
Display error 6 µm or 2 %
Resolution 1 µm
Actuation force 10 cN
Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps
Lo setting is done manually
Measuring arms Opening and closing are motorized
Specimen diameter 0-30 mm
Specimen thickness 0-30 mm
Specimen width 0-100 mm
Weight approx. 32 kg
Scope of supply Extensometer complete with electronics
Cutting, round: 1 set of hard metal / rubber
Wear parts Measuring blades
optional rectangular blades
CAUTION: When using optional blades,
a readjustment of the Lo stop is required.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.