Tensile testing machine-Universalp according to DIN 7500

Hegewald & Peschke H5TMNI

Universal testing machine H 5 TMNI (L) 250mm, extended

Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4

2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm
1 working area up to nominal load:
Working area width: 420 mm
Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm
Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm

Travel speeds:

Testing speed 0.001 - 1200 mm/min up to nominal load
Return speed 1200 mm/min

Force measurement:

Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4.
Hodpfsiq Hxvsx Ahvenr
Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits.
The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately.

Crosshead travel measurement:

Incremental square-wave input with encoder monitoring, storage of the crosshead position
Resolution of the crosshead travel measurement:

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.