PRESS BRAKE 63X2500 ESTUN E21

Otinus PBO-2563-N Estun E21

Attention!! Special Offer!!
Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz.

A part of our machines is available IMMEDIATELTY.

Hydraulic press brake PBO-2563-N Estun E21

Specifications
- Maximum bending thickness (S235): up to 4.0 mm
- Nominal bending force: 630 kN
- Maximum bending length: 2500 mm
- Throat depth: 250 mm
- Maximum stroke: 120 mm
- Daylight: 370 mm
- Distance between side frames: 2000 mm
- Backgauge travel distance: 600 mm
- Motor power output: 5.5 kW
- Length: 2600 mm
- Width: 1400 mm
- Height: 2200 mm
- Weight: 3700.0 kg

Tools

Front supports: 2 pcs.
Backgauge drive (travel along the X-axis): electric motor
Ram drive (travel along the Y-axis): electric motor
Punch quick change tooling system form AMADA


E21 control
(mounted on a swivel arm)

Manages the movement along the X axis (backgauge) and Y-axis (ram).
Allows to create up to 40 programs
Each program can consist of up to 25 steps
Intuitive operation using English abbreviations explained throughout the training course.

It is a sophisticated but easy-to-use controller that allows operation in three modes:

Full manual
Semi automatic
Hands-free cycle mode

Top quality components

Rexroth hydraulic valve
Schneider electrical components
Omron and Schneider safety circuit parts.
Steel hydraulic line tubings
Hydraulic lines made of steel instead of rubber reduce the risk of future leaks.

Safety

We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies.

The machines comes with carefully prepared instructions manual.
The machine has a CE marking and EU declaration of conformity.

Oil cooling system

The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation.

Within the service, our technicians may:

Specify the bending steps for intricate parts.
Advise on material and gas selection
Assist in the selection of operating parameters for different materials
Hfjdpfx Aaeh Randezeb

Included in the machine price
2-day training including installation of the machine
- 1st day (up to 8 hours) - installation of the machine and learning to use the controller.
- 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client.
Telephone consultation with a specialist
- 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months

- Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine).

Terms of cooperation
- 24 month warranty
- The machine is brand new
- Warranty and post-warranty service provided by the seller
- The Client is responsible for the machine during unloading and transporting on-site