Scienlab Battery Test System

Keysight SL1000A 1000V 900A 360kW

KEYSIGHT TECHNOLOGIES
Scienlab Battery Test System
Keysight SL1000A
1000 V / 900 A / 360 kW – water-cooled
Dsdpfxs Ah Splo Acrscp
Used bidirectional battery test system for testing high-voltage batteries and energy storage devices with controlled charge/discharge cycles and electrical measurement data acquisition.

Technical data:
Manufacturer: Keysight Technologies / Scienlab
Model: SL1000A; 1 channel
Declaration of Conformity: 03/27/2019
Acceptance/Calibration documents: 04/16/2019
Electrical output data:
Output voltage: 50–1000 V DC
Output current: ±900 A DC continuously
Output power: max. ±360 kW/channel
Current rise time: under 2 ms (typically 1.6 ms)
Mains connection:
400 V AC / 50 Hz; 3 (N), PE
Rated current: 2 × 290 A
Fuses: 2 × 315 A gG
Efficiency: over 90%; cos φ over 0.98
Power loss: under 36 kW
Measurement data acquisition:
Voltage: 4-wire; ±0.05% of measured value ±300 mV offset
Current: ±0.05% of measured value ±180 mA offset
Current ripple: ±0.2% up to 3.6 Aeff.
Temperature: 3 × PT100, 4-wire, -50 to +130 °C; ±1 K
Measurement and communication data:
8 analog inputs, 0–20 mA, 32 bit
Sampling rate: max. 20 kS/s
CAN: 500 kBaud; MCM: Ethernet
Optional: BMS-CAN, climate chamber Ethernet
Cooling water supply:
Water-cooled; heat to be dissipated: 36 kW
Supply: 6–20 °C; return: max. 30 °C
Flow rate at full load: approx. 2 m³/h
Supply pressure: max. 6 bar
Pressure difference: over 1.5 to 3.0 bar
Connections: 1 inch male thread; condensate: 3/4 inch male thread
Dimensions and operating conditions:
External dimensions (W × D × H): approx. 3820 × 880 × 2500 mm
Weight: approx. 2900 kg
Protection class: IP54; protection class I
Environment: +5 to +40 °C; 30–75 % rel. humidity
Operating altitude: max. 2000 m above sea level
Equipment:
Modular power modules, resonant converter, internal cooling water circuit, cooling unit, DC output, output and mains circuit breakers/chokes, EMC filter, measurement/control unit, insulation monitoring, overvoltage protection, main switch, emergency stop, key switch for test release, signal light.
Applications:
HV battery testing, battery development, energy storage testing, charge/discharge testing, test benches, research and automotive industry.
Documentation:
Manufacturer's operating manual, declaration of conformity, acceptance and calibration records from 2019; further documents as shown in the images. No statement regarding current calibration.
Condition:
Used; optical condition as shown in the images.
Scope of supply:
1 × Keysight SL1000A Scienlab Battery Test System; documentation and accessories as shown in the images.
Shipping or freight shipping possible.
Subject to changes, errors and prior sale.
We would be happy to answer any further questions by phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.