Edge banding machine IMA Novimat Contour/I/G80/790/L20 (2009)

IMA Novimat Contour/I/G80/790/L20

- Edge material thickness: 0.3 - 3.0 mm
- Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm
- Veneer: 0.5 mm - 3.0 mm
- Wood strips: 0.8 - 20 mm
- Edge height: 14 mm - 65 mm

Single-sided edge banding machine
Manufacturer: IMA
Type: Novimat Contour/I/G80/790/L20
Year of manufacture: 2009
Technical data
- Electronically controlled feed speed: 6-30 m/min
- Edge material thickness: 0.3 - 3.0 mm
- Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm
- Veneer: 0.5 mm - 3.0 mm
- Wood strips: 0.8 - 20 mm
- Edge height: 14 mm - 65 mm
- Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm

Workpiece size:
- Minimum workpiece length in the feed direction: 150 mm
- Minimum workpiece width: 25 mm, thickness: 65 mm
- Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades
- Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying)
- Smallest element: 150 mm x 150 mm or 65 mm x 300 mm

Note: *65 mm with a maximum piece thickness of 25 mm
The edge banding machine is equipped with:
- Hand-adjustable guide rail for inserting workpieces
- Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz
- Heating unit for warming the workpieces
- Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm,

with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm
- Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container.
- Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h
- Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function
- Pre-milling unit 08.055, swiveling up to max. 30°
- Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min
- Cleaning agent dispenser
- Profile trimming blades 08.519
Dcedpfxjzuyprj Ai Don
- Surface trimming blade 08.521 for removing excess glue from glue joints
- Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm
- Groove/milling unit with one motor

Note:
The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.