Roundness and cylindricity measuring instrumentHommel Jenoptik
Hommel Etamic 4004
Roundness and cylindricity measuring instrument
Hommel Jenoptik
Hommel Etamic 4004
سال ساخت
۲۰۰۹
وضعیت
کارکرده
موقعیت
Mielec 

اطلاعات پایه
- نام دستگاه:
- Roundness and cylindricity measuring instrument
- تولید کننده:
- Hommel Jenoptik
- مدل:
- Hommel Etamic 4004
- سال ساخت:
- ۲۰۰۹
- وضعیت:
- کارکرده
قیمت و مکان
- موقعیت:
- SSE EURO-PARK, Polskiego 3, 39-300 Wojska, Polen

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A23356949
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۸.۰۸.۱۴۰۵
توضیحات
Application area and features:
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
Iijde Ak Huzopfx Aizsi
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
Iijde Ak Huzopfx Aizsi
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2020
۱۹ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 9733 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است








