Portal machining center

HOMAG O BAZ 722/58/K

HOMAG BAZ 722/58/K
Portal 4-axis CNC machine with 2 shuttle tables and gluing unit
Year of manufacture: 2004

Maximum workpiece dimensions:

Workpiece length X max. (with gluing unit)
- max. 5660 mm for single allocation
- max. 2680 mm for pendulum operation
Workpiece length max. (cutter D=25mm)
- max. 5860 mm for single allocation
- max. 2870 mm for pendulum operation

Workpiece width Y max.
- max. 1300 mm - all units
- max. 1400 mm - with gluing unit
- max. 1520 mm - with milling operation D=25 mm

EQUIPMENT / SPECIFICATION
Console table / vacuum system
- 2 independently operating shuttle tables in Y direction (2 Y-axes)
- Both shuttles can be used synchronously (moved) for processing large workpieces (single processing).
- 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front
Each console fitted with a lift-off rail on the side
- Console length 1340 mm
- 3 retractable side stops 2 x left, 1 x right (mirrored)
- Approx. 20 block suction cups 160x140 mm
- 2 vacuum pumps, capacity 100/140 m3/h, 1 x for left field, 1 x for right field

Milling spindle / units / tool changer
- Main spindle 7.5 kW (in S6 or S1 operation), n max = 18,000 1/min, vector-controlled
HSK F63 tool clamping
Liquid cooling with temperature monitoring
NOTE: The main spindle was replaced in 2021.
- C-axis with unit interface
- Additional spindle with permanently mounted gluing unit (own X and C axis),
360° gluing, with butt gluing
- Double edge roll holder, automatic edge change
- Fixed drilling head with 12 vertical spindles (individually selectable) /
6 spindles in X and 7 in Y direction,
Drive motor 4 kW, 4500 – 6000 1/min
- 18-fold tool changer (rotary type)
- Saw and crosscut unit for tool changer
- Drilling and milling unit 4 spindles (2 * X-, 2 * Y-direction)
- Combination flush-milling and scraping knife unit

Chip extraction / safety / other
- Chip conveyor belt in machine body
- Safety fence left and right of the machine, 1 door with safety functions
- Extraction nozzle

Control / software:
• PowerControl PC85 operating system
NOTE: Both machine computers were replaced in 2020.
• WoodWop 5.0
• Woodscout
Hfodpfx Aowpb Nfocyon
• Power supply 400 V, 50/60 Hz
• Cooling unit for switch cabinet
• Laser positioning Mr. BEAM

Machine dimensions (occupied area after installation)
L 1150 x W 700 x H 290 cm

Availability: immediately

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.