Edgebander

HOLZ-HER Sprint 1329 Premium Edition 18

The machine was last serviced in February 2026 and will remain powered until 05.08.2026!

The machine has the following configuration:

Jointing Milling Unit 1802
Motor power: 2 x 2.0 kW
1st cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for jointing milling unit
2nd cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for jointing milling unit

Edge Feeding 1901 SYNCHRO (fully automatic)

Glue Application Station Glu Jet GJ301 (automatic)
Performance: 2.3 kW, 50 Hz
Cartridges: storage chute for 14 cartridges (1.4 kg)

GluJet Collection Container

Pressure Section 1913 MOT

End Trimming Unit 1918 (60 mm) pneumatic

Multi-Function Milling Unit 1826 MOT4
Motor power: 2 x 0.65 kW
Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm left-hand rotation
Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm right-hand rotation

Profile Milling Unit 1833 MOT4
1st cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2 mm, left-hand rotation with CM technology
2nd cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2 mm, right-hand rotation with CM technology

Scraper Unit 1929 MOT4
HW reversible knives for scraper holder R = 2 mm (2 pcs. required)

Flat Scraper FK 701

Buffing Unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm)

Spray Device 1856

TECHNICAL DETAILS

Feed speed: 10 - 18 m/min
Minimum workpiece length: 160 mm
Minimum workpiece width: 60 mm
Workpiece thickness: 8 - 60 mm

Max. edge height: 65 mm
Edge thickness roll material: 0.4 - 3 mm
Edge thickness strip material max.: 8 mm

MACHINE DETAILS

Control: Edge Control 19 with 18.5" touchscreen

Infeed fence length: 1,350 mm

Electrics for stepless feed: 400 V / 50 Hz
Electromotor feed: 2.2 kW

Operating hours: 1,483 h

EQUIPMENT
Motorized pressure bridge adjustment
Nesting – top & bottom vertical sensor shoe
Edition 18 package
ECO MODE energy-saving mode
ITronic system