Machining center HOLZ-HER Evolution 7405 - used -

Holz-Her Evolution 7405

Machining Centre HOLZ-HER Evolution 7405 - used -

Through-feed processing,
4-sided edge trimming possible,
automatic suction cup positioning,
hardened, dust-protected prism guides,
ball screw drives on all axes,
network card for remote maintenance,
integrated control cabinet,
control cabinet cooling with heat exchanger,
manual control device,
saw unit for grooving in the X direction,
pick-up tool changer

----- Technical Data -----
Minimum workpiece length X: 200 mm
Minimum workpiece width Y: 70 mm
Minimum workpiece thickness: 8 mm
Maximum workpiece length X: 3,200 mm
Crjdexddhkjpfx Abfjh
Maximum workpiece width Y: 920 mm
Maximum workpiece thickness: 70 mm
Machine control software: CAMPUS HOPS
Main spindle motor power: 6.5 kW
Main spindle speed: 1,000 - 18,000 rpm
Main spindle mount: HSK-F63
Drilling unit motor power: 1.7 kW
Drill spindle mountings: M10, precisely fitted 11 mm
Number of vertical drill spindles: 9 pcs
Number of horizontal double drill spindles in X direction: 2 pcs
Number of horizontal double drill spindles in Y direction: 1 pc
Saw blade diameter of saw unit: 120 x 20 mm
Number of tools in changer: 6 pcs
Extraction connection diameter: 2 x 120 mm + 1 x 140 mm
Required air volume flow: 4,100 m³/h
Required static negative pressure: 2,500 - 3,000 Pa
Required air velocity: 30 m/s
Compressed air connection: 6 bar
Compressed air requirement: 300 NL/min
Dimensions (LxWxH): 3,673 x 1,924 x 2,340 mm

Quality info:
- Completely basic cleaned
- Electrical system checked
- Pneumatics checked
- Adjusted according to manufacturer specifications
- Immediately ready for operation

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.