Hot air stove ,wood stove,Heating

WLO 2 20 KW

Selling a WLO 20 KW Hot air stove ,wood stove,Heating

Technical parameters of the furnace

Nominal heating output: 20.00 kW
maximum heating output: 23.00 kW / approx. 230 m2
in set: force axial fan speed: 1380 rpm and capacity: 2910 m3 / h
in the set: driver
Innovative design of the air jacket that completely surrounds the stove for maximum efficiency
indestructible fireplace made of 5mm thick boiler plate
large exhaust deflector reduces fuel consumption by up to 30%
Energy efficiency class: A
Energy efficiency index: 110
Net weight: 160 kg
Gross weight: 180 kg
Furnace lining: 12 firebricks
replaceable large cast iron grate
covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look
massive structure
large combustion chamber
large loading door
User Guide
Efficiency: 75.00%
CO emission at 13% O2: 1.20m
Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10%


Security and Certifications

CE mark: YES / located on the nameplate
Compliance with standard: EN13240: 2006
BimSchV level 2: Yes

Dimensions
Lhedpfjixun Tox Ah Rep

External Dimensions: Overall Width: 485mm x Overall Depth: 790mm x Overall Height: 1030mm
Oven dimensions: Width: 380mm x Depth: 450mm x Height: 500mm
Upper door dimensions (sheet 3 and 4 mm): width: 365 mm x height: 215 mm
Bottom door dimensions (3 & 4mm sheet metal): Width: 365mm x Height: 295mm
Top Loading Port Dimensions: Width: 285mm x Height: 195mm
Lower Loading Port Dimensions: Width: 285mm x Height: 265mm
Cast iron grate dimensions: Width: 210mm x Depth: 300mm
Diameter hot air outlet: Ø 120mm
Diameter exhaust outlet: Ø 130mm
Leg height: 140mm

Technical parameters of the fan

Type of fan: axial fan
Material: steel (propeller + housing)
Diameter: Ø 300mm
Power supply: 230V / 50Hz
Engine: 4P
Current consumption: 0.30A
Speed: 1380 rpm
Air flow: 2910 m3 / h
Safety: CE mark + protective net