Edgebander

Hebrock K36

Edge banding machine K36, 1 unit, with PLC control (including touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (including DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir system including adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius trimming blade; flat trimming blade (including pneumatic feed); cleaning station; 1 free space for a 2nd milling station or a groove cutter (groove cutter only if the cleaning station is removed); robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, pull-out workpiece support, signal lamp for workpiece sequence.

Technical data:
Max. edge thickness: 3 mm
Max. rabbet thickness: 3 mm
Min. workpiece height: 8 mm
Max. workpiece height: 60 mm
Dedpfx Aiszvhk Ho Djcn
Max. rabbet height: 40 mm
Min. workpiece length: 160 mm
Feed rate: approx. 10 m/min
Ready for operation: approx. 5 min.
Power consumption: (400V – 3Ph – 50 Hz)
Working height: approx. 900 mm
Machine dimensions: approx. 5250x1250x2050 mm (L x W x H)
Weight: approx. 1700 kg
Dust extraction nozzle: 1x140 mm + 1x80 mm

8 mm version
K36, 1 unit, quick-change system for corner cutter
K36, 1 unit, surcharge for multi-radius trimming blade (R2/R1)
K36, 1 unit, rabbeting up to 60 mm workpiece thickness
K36, 1 unit, release agent spraying device, plate
K36, 1 unit, cleaning agent spraying device, plate
K36, 1 unit, nesting for milling station
K36, 1 unit, nesting for radius trimming blade
K36, 1 unit, pneumatic 3-point adjustment
K36, 1 unit, Airtronic
K36, 1 unit, extension of the infeed and outfeed support by 440 mm each, 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support area for improved workpiece handling by 450mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter 24.1 mm, 1 unit. Ball bearing for corner rounding cutter 24.2 mm, 1 unit. Packaging surcharge, 1 unit. Additional quick-change reservoir including level sensor. Manufacturer: Hebrock, Type: 36/14/1, Article No. H36/14/1, 1.00 unit. Additional changeover motor for corner cutter K36. Manufacturer: Hebrock, Type: 36/08/2, Article No. H36/08/2, 1.00 unit. R1
Storage location: Nattheim.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.