Edgebander

Format4 tempora 60.12

with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system.

The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70.
Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm.
“e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection.
Stable machine stand made of steel.
Extendable workpiece support facilitates working with large workpieces.
Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece.
Chain feed with rubberized support pads for optimal hold on the workpiece.
Ball-bearing roller support plate with Ø 770 mm.
Feed guide rail with sliding rollers for sensitive materials.
Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2.
Edge detection using an infrared sensor.
Shear cutter for pre-capping thick PVC/ABS edge materials.
Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges.
Pneumatically tool-controlled gluing unit.
Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned.
Gbjdpfxjzcymho Aivsu
Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°.
Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel.
Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height.
2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function.
Polishing unit with 2 motors.

Special equipment
020 Surface drawing blade, pneumatically tool-controlled
032 Spray device for cleaning agents before the polishing unit
042 Spray device for release agents on the machine infeed side (PUR adhesive)
046 Extended feed guide rail (+400 mm)
047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW
051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes
053 Spraying of lubricant
Pneumatic-mechanical insertion lock to prevent premature feeding of the machine
059 Automatic lubrication for the chain conveyor
064 Pneumatic-mechanical insertion lock
067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges.
050A Additional interchangeable glue tank, counter-rotating
090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm
071 Motor-controlled adjustment and positioning for corner rounding cutters
085 Preparation for u-motion professional
033 LED lighting
505 Exhaust distributor professional

Includes delivery & inst

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.