Hydraulic pressFJELLMAN
700T
Hydraulic press
FJELLMAN
700T
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۳۵٬۰۰۰
سال ساخت
۲۰۱۵
وضعیت
کارکرده
موقعیت
Kowalew 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Hydraulic press
- تولید کننده:
- FJELLMAN
- مدل:
- 700T
- سال ساخت:
- ۲۰۱۵
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۳۵٬۰۰۰
- موقعیت:
- 63-300 Kowalew, Polska

تماس بگیرید
جزئیات فنی
- نیروی پرس:
- ۷۰۰ t
- وزن کل:
- ۵۰٬۰۰۰ کیلوگرم
- طول کورس (ضربه):
- ۱٬۵۰۰ میلیمتر
- تجهیزات:
- مستندات / راهنما
جزئیات پیشنهاد
- شناسه آگهی:
- A19367006
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۴.۰۷.۱۴۰۴
توضیحات
Press used for composites, until now it worked in Belgium.
Dodpfx Aewtbc Tjg Iowf
In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute.
Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements.
The press is currently in Poland, 63-300 Pleszew, Poland.
Pressure 700T.
Dimensions of the upper foot 180x240.
Foot stroke approx. 150cm.
The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels.
Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation.
The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press.
The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe.
It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements.
The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Dodpfx Aewtbc Tjg Iowf
In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute.
Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements.
The press is currently in Poland, 63-300 Pleszew, Poland.
Pressure 700T.
Dimensions of the upper foot 180x240.
Foot stroke approx. 150cm.
The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels.
Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation.
The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press.
The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe.
It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements.
The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2025
ارسال درخواست
تلفن & فکس
+48 511 1... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Deinze
۴٬۵۴۲ km
Fanuc Milling RobotX: 10 500 / Y: 3045 / Z: 3500 mm CNC
آگهی کوچک
Sternenfels
۴٬۱۳۳ km
SchütteSF 26 DNT
آگهی کوچک
Coutances
۴٬۸۷۹ km
FEINTOOLSMG 630
آگهی کوچک
Osnabrück
۴٬۲۶۰ km
KlankeFBA1100
آگهی کوچک
Gerolstein
۴٬۳۱۰ km
GLEASON- PFAUTERGP 130
آگهی کوچک
Hagen
۴٬۲۶۹ km
Mazak Nexus 250M
آگهی کوچک
آلمان
۶٬۶۸۰ km
CHIRON - WERKE GMBH &Mill 800 FA
آگهی کوچک
Heilbronn
۴٬۱۱۲ km
AuerbachIA3 TLF-U
آگهی کوچک
Mamer
۴٬۳۴۵ km
WMW HECKERTHEC 800 Athletic
آگهی کوچک
Deinze
۴٬۵۴۲ km
DorriesØ 6500 x 4270 mm CNC
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است





























































































