Edgebander

Felder tempora F400 45.03L

For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019.

Bwjdpfx Apj Ahmv Ajnew
The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units.

PERFORMANCE DATA
According to the total counter of the machine control system, as of October 30, 2026:
• Piece counter: 24,696
• Total edge length processed: 22,186.4 m
• Operating time of chain conveyor: 415 hours 58 minutes
• Operating time of main switch: 4,996 hours 3 minutes

The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor.

EQUIPMENT
• m-motion control system with a 10-inch smartouch touchscreen
• Jointing unit with plunge-controlled diamond cutters
• Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller
• Pneumatically controlled pressure unit
• Guillotine shear for roll edge material from 0.4 to 3 mm
• Miter saw unit with 0°/10° cutting selection
• Upper and lower flush trimming and radius milling units with manual adjustment
• Corner processing unit for post-forming and softforming profiles
• Radius scraping blades, top and bottom
• Surface scraping blades, top and bottom
• Polishing units, top and bottom
• Release agent spray device
• Extendable workpiece support
• Edge magazine with rotary table, diameter 740 mm

TECHNICAL DATA
• Workpiece height: 8–45 mm
• Roll edge thickness: 0.4–3 mm
• Feed rate: 9 m/min
• Minimum workpiece length: 140 mm
• During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm
• Jointing depth, manually adjustable: 0–2 mm
• Electrical connection: 400 V / 50 Hz

INSPECTION AND PICKUP
Location: Neuwied.
Inspection by appointment only.
Pickup only. Transportation and loading must be arranged in advance.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.