Safety tester test deviceEaton
Sefelec 506-S
Safety tester test device
Eaton
Sefelec 506-S
سال ساخت
۲۰۲۳
وضعیت
کارکرده
موقعیت
Viersen 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Safety tester test device
- تولید کننده:
- Eaton
- مدل:
- Sefelec 506-S
- سال ساخت:
- ۲۰۲۳
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- 41748 Viersen-Ummer, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A20368890
- شماره مرجع:
- 8312-1
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۲.۰۸.۱۴۰۴
توضیحات
Safety Tester for High Voltage Test Station
- EATON Sefelec 506-S
The device was purchased in 2023 and is in excellent condition.
The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements.
The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection.
The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench.
The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation.
- Standard interfaces: Ethernet / RS232 / USB / PLC
- Optional: IEEE488-2 interface
- Dual safety circuit SIL2
- Automatic selection of test series
- Sequence mode for combining multiple consecutive tests
Withstand voltage at 5kVAC 500VA and 6kVDC
Detection modes by current threshold or current fluctuations (ΔI)
Burn function mode without current detection
Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC
Optional: 2TΩ range
PE testing at 32A - 8VAC, measurement 0 ... 1Ω
Optional: testing current 50A
Programmable test ramps
Ramp up, hold, ramp down
Multi-ramp mode, up to 7 steps
TFT touchscreen 7", 16 million colors, for programming and display of current tests and results
Lsdoxqxt Ijpfx Agnohn
Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability
Integrated DSP for higher test speeds
Large internal memory for storing configurations and test results
Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength)
Shipping is possible upon arrangement.
#8312-1
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
- EATON Sefelec 506-S
The device was purchased in 2023 and is in excellent condition.
The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements.
The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection.
The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench.
The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation.
- Standard interfaces: Ethernet / RS232 / USB / PLC
- Optional: IEEE488-2 interface
- Dual safety circuit SIL2
- Automatic selection of test series
- Sequence mode for combining multiple consecutive tests
Withstand voltage at 5kVAC 500VA and 6kVDC
Detection modes by current threshold or current fluctuations (ΔI)
Burn function mode without current detection
Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC
Optional: 2TΩ range
PE testing at 32A - 8VAC, measurement 0 ... 1Ω
Optional: testing current 50A
Programmable test ramps
Ramp up, hold, ramp down
Multi-ramp mode, up to 7 steps
TFT touchscreen 7", 16 million colors, for programming and display of current tests and results
Lsdoxqxt Ijpfx Agnohn
Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability
Integrated DSP for higher test speeds
Large internal memory for storing configurations and test results
Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength)
Shipping is possible upon arrangement.
#8312-1
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ارسال درخواست
تلفن & فکس
+49 2162 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است














































