Compressed air adsorption dryer

Donaldson Filtration HRS 1000 Ultrafilter

1 heat-regenerating compressed air adsorption dryer.
The dryer was in use from 2014 to 2017. The system has been out of operation since 2017.
The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW.

Manufacturer: Donaldson Filtration Deutschland GmbH
Type: HRS 1000
Year of construction: 2014
Volume flow at 7 bar: 1000 m³/h (16.66 m³/min)
Connection: DN 80
Installed power: 14.2 kW
Dimensions length / width / height: 1680mm / 1020mm / 2460mm
Weight: 1540 kg
Desiccant bottom (20 cm): 3 mm activated aluminum oxide
Desiccant middle (40 cm): 2 mm activated aluminum oxide
Top desiccant (rest up to the top) silica gel as a ball.

Itjdpfjr A El Eex Acyjn
The desiccant is already disassembled and immediately available.
The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags.
The desiccant is still in a usable condition. It is not oily or soiled.
There is the possibility of external re-drying.

The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared.
"Loose adhesion on the lower part of the dished end" (pictures to follow)

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.