FGT-Shrink Sleeve Forming & Gluing Machine

DCM USIMECA Sleeve 3

Technical Data
Material: Printed or unprinted shrink films
Film types: PVC, PET, OPS shrink film
Film thickness: approx. 28–100 µm
Minimum sleeve width: approx. 50 mm
Maximum sleeve width: approx. 300 mm
Maximum unwind diameter: approx. 600 mm
Maximum rewind diameter: approx. 600 mm
Sleeve width tolerance: approx. +/- 0.15 mm
Outer web overlap: approx. 0–1 mm
Glue position: Adjustable
Ndjdpfx Aozka T Asnkeb
Maximum production speed: Up to 500 m/min
Maximum sleeve roll weight: approx. 50 kg standard
Power supply: 240 V / 50 Hz
Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min

_____
Machine Configuration
Based on available information, the machine is equipped with the following main units:
Unwinding Section
• Unwinding unit
• Cantilevered unwind shaft
• Pneumatic arm for supporting the master roll
• Core adapter for 76 mm core diameter
• Core adapter for 152 mm core diameter
• Electromagnetic brake controlled by an ultrasonic sensor
• Automatic web guiding with ultrasonic sensor
Gluing / Solvent Application
• Solvent application unit for gluing
• Pressurized solvent tank
• Speed-dependent glue quantity control
• Adjustable glue seam position
Sleeve Forming Section
• Longitudinal pre-cutting / perforation unit with two perforation wheels
• Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm
• Adjustable guide rollers for sleeve forming
• Roller sets for laying the film around the forming bar
• DCM control system for sleeve width measurement
Rewinding Section
• Rewinding unit
• Machine control cabinet
• Touchscreen control

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.