Climate test chamber 5,500 liters (5.5 m³)

CTS CW-60/5,5 -60°C bis +100°C

CTS CW-60/5.5 – Water-cooled Climate Test Chamber

The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously.

Device Description:
This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity.
Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen.
The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door.
For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower.

Technical Specifications:
Temperature Tests:
- Temperature range: -60 °C to +100 °C
- Temperature deviation: ±0.5 to 1 K over time
- Temperature change rate (linear, with specimen and radiant heat measured in supply air):
- Heating: 2 K/min from -40 °C to +85 °C
- Cooling: 2 K/min from +85 °C to -40 °C

Climate Tests:
- Temperature range: +10 °C to +90 °C
- Humidity range: 10% to 95% relative humidity
- Dew point area: +5 °C to +89 °C
- Temperature deviation: ±0.5 K over time
- Humidity deviation: ±1 – ±3 % RH over time

The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features.

Dimensions:
Interior (Test Chamber/Usable Space):
- Volume: approx. 5,500 liters (5.5 m³)
- Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm
External dimensions:
- Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm

Operating Data:
- Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz
- Rated power: 58.3 kW (including 5 sockets)
- Rated current: 86.0 A
- Protection class: IP 54

Technical Features:
- Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system
- Environmentally-friendly refrigerants: R 23 / R 404 A

Notes:
- Inspection available by appointment (46325 Borken)
- Shipping by freight carrier possible – costs and arrangements upon request
- Scope of delivery: (see picture)

(Subject to technical modifications and errors in specifications!)
Nkedpfx Aex Eaxbofhet
If you have further questions, we will be happy to answer them by phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.