CTS Climate Test Chamber C-70/600 -70°C to +180°C with humidity control, 600 liters

CTS C-70/600

CTS

Type: C-70/600

CTS C-70/600 climate testing chamber, air-cooled version
with observation window, test item protection, and documentation

For sale is a high-quality CTS climate testing chamber, type C-70/600,
for precise temperature and climate testing in research,
development, quality assurance, and industry.

The unit is in used condition
and can be fully inspected as shown in the pictures.
The current display shows manual operation / stop,
temperature actual value 16.59 °C, setpoint 5.00 °C,
humidity actual value 39.7 % RH, and water supply actual value 11.0 l.

Technical data:

Temperature range: -70 °C to +180 °C
Humidity range: 10 % to 98 % RH
Dew point range: -10 °C to +94 °C
Test chamber volume: 600 liters

Electrical connection: 400 V 3/N 50 Hz
Rated power: 8.7 kW
Rated current: 14.8 A
Protection class: IP 22

Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage)
Cascade refrigeration system for low-temperature operation down to -70 °C
Operating overpressure PS: 25 bar
Test pressure PT: 27.5 bar

Equipment / Features:

Observation window in the door
Stainless steel test chamber
CTS control panel with digital setpoint/actual value display
Test item protection / temperature limiter
Water connection / deionized water supply
Test chamber and condensate drain
Pipe penetrations on the side of the test chamber
RS232 interface as per documentation
Digital outputs for test item control

Test chamber dimensions as per documentation:
approx. 850 x 850 x 830 mm

External dimensions as per documentation:
approx. 1900 x 1115 x 1850 mm

Weight as per documentation: approx. 600 kg

Scope of supply:

CTS climate testing chamber C-70/600
Gujdpfx Aqey H Hl Hjpjh
including existing documentation / operating instructions
Scope of supply as shown in the pictures

The unit can be inspected by appointment.
Loading with a forklift can be arranged.

For your safety as a buyer, please note the following:

The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.

Condition: used

(Changes and errors in the technical data and specifications are subject to change!)

We would be happy to answer any further questions you may have by phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.