Screw Compressor LUFT + air dryer + tank

CORMAK LUFT 1000 INVERTER + N10S + BUTLA 270L

LUFT 1000 INVERTER Screw Compressor Set with 270 L Vertical Air Receiver and IZBERG N10S Refrigerated Air Dryer

The set includes the LUFT 1000 INVERTER screw compressor, a 270 L vertical compressed air receiver with fittings, and the IZBERG N10S refrigerated air dryer.

The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation.

Technical Specifications – LUFT 1000 INVERTER
Parameter Specification
Motor power 7.5 kW
Voltage 400 V / 50 Hz
Output at 0–6 bar 990 l/min
Output at 6 bar 950 l/min
Ledpfxoxazlrs Agxjhk
Output at 8 bar 950 l/min
Output at 10 bar 930 l/min
Outlet connection diameter (G) 1/2"
Dimensions 810 × 610 × 850 mm
Weight 160 kg
IZBERG N10S Refrigerated Air Dryer
Parameter Specification
Inlet/outlet pipe diameter (BSP) 1"
Maximum operating pressure 10 bar
Maximum inlet air temperature ≤ 38°C
Pressure dew point 3°C
Air flow rate 1,500 l/min
Power consumption 0.58 kW
Power supply 230 V
Dimensions (D × W × H) 380 × 600 × 625 mm
Weight 31 kg
Refrigerant type and quantity R134a, 400 g
Key Advantages of the 270 L CORMAK Pressure Vessel
Professional pressure vessel construction – manufactured from high-grade 4 mm thick steel, resistant to pressure and corrosion.
UDT certification and CE marking – compliant with European safety and quality standards.
Working pressure of 11 bar – suitable for most pneumatic systems, including applications with higher pressure requirements.
Large 270 L capacity – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles.
Multiple connection ports – as many as 5 connection ports with diameters of 1 1/4", 2" and 1/2", allowing flexible connection to various compressed air systems.
High-quality finish – durable anti-corrosion coating applied both inside and outside the tank.
Space-saving vertical design – the vertical configuration helps save valuable floor space in the facility.
Standard Equipment
5 connection ports – diameters: 1 1/4", 2", 1/2"
Rating plate with CE marking
UDT notified body identification number
Complete technical documentation and pressure vessel certificate
Internal and external anti-corrosion coating
Tank Accessories
1 × 1/2" plug
Pressure gauge + 1/2" adapter
1/2" tee fitting
1 1/4"–3/4" inlet/outlet connection
1/2" water drain valve
Important Note

The safety valve is not included with the tank accessories and must be purchased separately.