Concept Laser M2 cusing Multilaser 400W with accessories

Concept Laser M2 cusing

Concept Laser

Concept Laser M2 cusing Multilaser

Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc.

External dimensions:
2542 x 1818 x 1987 mm (W x D x H)

Weight: 2300 kg
2 lasers, 400W each
Power supply: 3P/N/PE AC 400 V, 32 A
5 bar compressed air required
Protective gas possible via 2 connections for external N2 generators (optional)
Build volume: 250 x 250 x 280 mm (X x Y x Z)
Material processed: CL31 / Aluminum-silicon-magnesium alloy (AlSi10Mg) or CL20 / Austenitic stainless steel (316L / 1.4404)
Layer thickness: 20-80 μm
Production speed: 2-20 cm³ (depending on material and laser power)
Operating conditions: 15-35 degrees Celsius

Laser usage time

Laser 1: 501 hours
Laser 2: 503 hours

Additional equipment:

Lifting device Inox 200
Weight: 102 kg
Max. lifting capacity: 135 kg
Protection class: IP65

Wet cutter NA 7-11 H CL EU Zone 22
Dimensions: 800x480-570x755-850 mm
Drive type: AC
Power: 1.25 kW
Voltage: 230 V
Hodpfx Aezh Dp Neqpefn
9.2 A
Protection type: IP65
Frequency: 50 Hz
Housing: Steel sheet
Airflow: 130 m³/h
Continuous negative pressure: -145 mbar
Short-term negative pressure: -235 mbar
Liquid volume: 7 l
Water consumption: 0.26 l/h
Weight: 50 kg

QM powder Automatic Sieving Station
Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz
Max. current draw: 3A / phase
Inert gas: 5 bar

Condition: used

Scope of delivery: (See picture)

(Changes and errors in the technical data are subject to change!)

We will gladly answer any further questions you may have over the phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.