Test tableChroma Batteriepack-Tester
ATE 17020
Test table
Chroma Batteriepack-Tester
ATE 17020
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲۰٬۰۰۰
وضعیت
کارکرده
موقعیت
Borken 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲۰٬۰۰۰
- موقعیت:
- Einsteinstraße 8a, 46325 Borken, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19479136
- شماره مرجع:
- 24588
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۲.۱۰.۱۴۰۴
توضیحات
Chroma
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Iodpfx Ajwwrxajazetb
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Iodpfx Ajwwrxajazetb
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ارسال درخواست
تلفن & فکس
+49 2861 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Wiedergeltingen
۳٬۹۸۲ km
HG GRIMME SysTech GmbHCNC Maschine - 5-Achs Fräsmaschine RT-F
آگهی کوچک
Borken
۴٬۳۲۷ km
Pfeiffer Oerlikon LeyboldWOD 410 B mit SC 60 D u. WKP 500A
آگهی کوچک
Borken
۴٬۳۲۷ km
VötschVTS³ 7027-25 -72°C bis +180°C
آگهی کوچک
Borken
۴٬۳۲۷ km
A.KRÜSSFP8400
آگهی کوچک
Borken
۴٬۳۲۷ km
WatersSynapt G2-Si (TOF mit Ionen-Mobilität)
آگهی کوچک
Borken
۴٬۳۲۷ km
ShimadzuAG-X plus 20kN-50kN +750mm
آگهی کوچک
Borken
۴٬۳۲۷ km
Espec (ThermoTec)TPC-212D
آگهی کوچک
آلمان
۴٬۳۲۷ km
LDSV870 50Hz 008001/31
آگهی کوچک
Borken
۴٬۳۲۷ km
AdeptModel 310
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است






















































































