Complete sawmill (stationary)ALMAB
5000/4000
Complete sawmill (stationary)
ALMAB
5000/4000
سال ساخت
۲۰۰۲
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Schwäbisch Gmünd 

اطلاعات دستگاه
- نام دستگاه:
- Complete sawmill (stationary)
- تولید کننده:
- ALMAB
- مدل:
- 5000/4000
- شماره دستگاه:
- 001
- سال ساخت:
- ۲۰۰۲
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Egental 8, 73529 Schwäbisch Gmünd, Deutschland

تماس بگیرید
جزئیات فنی
- حداکثر طول برش:
- ۵٬۰۰۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A22009028
- شماره مرجع:
- Trimmer und Stapelanlagen
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۷.۰۵.۱۴۰۵
توضیحات
Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats:
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
Hjdpfxsy Uzhfs Ahvonr
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
Hjdpfxsy Uzhfs Ahvonr
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2014
۳ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 7332 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Schwäbisch Gmünd
۴٬۰۵۳ km
ALMAB-Stapelanlage5000 / 4000
آگهی کوچک
Cloppenburg
۴٬۲۷۳ km
VollmerQWD 760
آگهی کوچک
Warburg
۴٬۱۶۶ km
FuchsMHL434F Timber
آگهی کوچک
Miechucino
۳٬۷۱۱ km
SocolestDAS 200
آگهی کوچک
ایتالیا
۳٬۷۵۸ km
BIESSEROVER C 6.40
آگهی کوچک
Malé Výkleky
۳٬۶۹۲ km
SG strojírny500
آگهی کوچک
Kežmarok
۳٬۳۲۳ km
WeinigUnicontrol 10
آگهی کوچک
Velké Karlovice
۳٬۴۷۸ km
unknownML-35
آگهی کوچک
Jonava
۳٬۴۰۶ km
Brettstapler
آگهی کوچک
Pesaro
۳٬۷۵۱ km
LOROCHSW
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است





























































































































