Chip removal filter AL-KO POWER UNIT 300AL-KO
POWER UNIT 300P
Chip removal filter AL-KO POWER UNIT 300
AL-KO
POWER UNIT 300P
VB به اضافه مالیات بر ارزش افزوده
€۱۰٬۰۰۰
سال ساخت
۲۰۱۹
وضعیت
کارکرده
موقعیت
Varpaisjärvi 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Chip removal filter AL-KO POWER UNIT 300
- تولید کننده:
- AL-KO
- مدل:
- POWER UNIT 300P
- سال ساخت:
- ۲۰۱۹
- وضعیت:
- تقریباً نو (استفادهشده)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۹۰۰ h
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۱۰٬۰۰۰
- موقعیت:
- Varpaisjärvi, فنلاند

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A20639930
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۸.۰۹.۱۴۰۴
توضیحات
As-new AL-KO POWER UNIT 300P dust extraction filter, 2019
Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing.
Buyer is responsible for dismantling and removal of the unit.
Tjdsxz Rg Ijpfx Agkef
The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors!
Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter.
By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB!
In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium.
POWER UNIT 300P
- Extraction port D 300 mm, max. air flow 6,000 m³/h
- Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l
- Includes compressed air cleaning
- Includes automatic shutoff system
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing.
Buyer is responsible for dismantling and removal of the unit.
Tjdsxz Rg Ijpfx Agkef
The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors!
Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter.
By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB!
In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium.
POWER UNIT 300P
- Extraction port D 300 mm, max. air flow 6,000 m³/h
- Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l
- Includes compressed air cleaning
- Includes automatic shutoff system
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ارسال درخواست
تلفن & فکس
+358 44 2... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Bitburg
۴٬۳۱۴ km
AL-KOPower Unit 300 P
آگهی کوچک
Asenovgrad
۲٬۷۵۱ km
BrotherTC-S2DN-O
آگهی کوچک
Bad Honnef
۴٬۲۷۱ km
AL-KOReinluftentstauber AL-KO POWER UNIT 300 P
آگهی کوچک
Euskirchen
۴٬۳۰۷ km
AL-KOPOWER UNIT 300 P
آگهی کوچک
Coevorden
۴٬۳۵۵ km
OREES-1530 stock
آگهی کوچک
Schwanberg
۳٬۶۱۹ km
AL-KOPower Unit 300 P
آگهی کوچک
Bitburg
۴٬۳۱۴ km
AL-KoPower Unit 300 P - sofort verfügbar
آگهی کوچک
Beringen
۴٬۱۳۱ km
SCHAUBLIN22
آگهی کوچک
Bitburg
۴٬۳۱۵ km
AL-KOPOWER UNIT 300 P - sofort verfügbar -
آگهی کوچک
مجارستان
۳٬۳۱۵ km
MAHRMarSurf CD 140
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است

















































