Zwick Roell ProLine Z005 5kN material testing machine with Xforce P load cell

ZwickRoell 5kN ProLine

Zwick / Roell

Universal testing machine / Material testing machine

Zwick / Roell ProLine Z005 Universal Testing Machine
5 kN testing machine for tensile, compression, and material testing

For sale is a used universal testing machine
from the manufacturer Zwick / Roell.

The machine is suitable for tensile tests, compression tests,
material testing, component testing, quality assurance,
research and development, and laboratory applications.

Technical data

Manufacturer: Zwick / Roell
Type: ProLine Z005 / 5 kN ProLine
Type of device: Universal testing machine / Material testing machine
Year of manufacture: 2016
Made in Germany

Maximum testing force: 5 kN
Load cell: Zwick Xforce P
Rated force of load cell: 5 kN

Start of measurement, accuracy class 1: 20 N
Start of measurement, accuracy class 0.5: 100 N
Nominal measuring range: 0.06 mm

Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H)
Frame width: approx. 720 mm
Installation width of frame: approx. 770 mm
Testing space width: approx. 440 mm

Machine weight: approx. 200 kg
Weight of load cell: approx. 0.65 kg

Mains connection: 230 V
Frequency: 50 / 60 Hz
Current consumption: 3.5 A
Connection: 1L / PE / N

Measuring module: DCSC
Measuring range: 0.2 % to 165 % of the nominal measuring value
Measurement value acquisition rate: max. 10 kHz
Measuring input: Differential input
Rcedpozfy Ivsfx Abnsh

Sensor supply: 10 V DC
Strain gauge bridge resistance: 175 to 1200 Ω
Connection type: 4- and 6-conductor technology
Nominal sensitivity: 2 mV/V

Connection thread for load cell: M28 x 1.5
Connection bolt: Ø 20 mm
Dowel pin: Ø 8 mm
Degree of protection of load cell: IP54

Load cell

Type: Xforce P
Rated force: 5 kN
Working force max.: 150 % of Fnom
Limit force: 150 % of Fnom
Breaking force: 300 % of Fnom
Limit transverse force: 100 % of Fnom

Component height: 95 mm
Installation dimension: approx. 72 mm
Installation height: approx. 61 mm
Diameter: 54 mm

Equipment

Zwick / Roell ProLine testing frame
Xforce P 5 kN load cell
DCSC measuring module
Electronic force measurement
Machine electronics on the side of the load frame
PC system / testing software as shown in the pictures
Accessories as shown in the pictures

Application areas

Tensile testing
Compression testing
Material testing
Material characterization
Quality assurance
Incoming goods inspection
Research and development
Laboratory applications

Condition

Used
Optical condition as shown in the pictures

Scope of delivery

1x Zwick / Roell ProLine Z005 Universal Testing Machine
1x Xforce P 5 kN Load Cell
1x DCSC Measuring Module
PC system / Software as shown in the pictures
Accessories as shown in the pictures

The table shown in the photos, as well as any other items not explicitly mentioned,
are not included in the sale.

Shipping or forwarding possible.
Subject to changes, errors and prior sale.

We will gladly answer any further questions by telephone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.